Replacement Handles For UPVC Windows

UPVC window handles are available in a variety of styles, however they all share the same locking mechanism. To replace a uPVC handle, first remove the top screw from the bottom of the window handle which will reveal two more screws.

Then, take a measurement of the length of the spindle to make sure the new handle is a suitable replacement. It is essential to know the kind of handle you have as there are several sizes.

Inline Espagnolette Handles

Most double-glazed windows come with Espagnolette handles which operate multi-point locks for improved security. They work by using a 7mm square spindle from the back of the handle, which connects with a gearbox inside the window frame, which turns multi-locks when turned. They are available in a variety of styles including cranked, inline key locking and cockspur handle, and they can also be supplied as a set to replace one handle that is damaged or worn out.

Our uPVC replacement handle kits are designed to make it easy to replace window handles a damaged or broken window handle with a espagnolette. These uPVC handles come with all the necessary fixing screws and a variety of spindle sizes that will work for the majority of applications. These handles also come with key-plugs that allow them to be changed from standard open/closed handles to fire escape or egress non locking handles (if they are fitted with the appropriate key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don’t need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Yale Sparta Inline Espag Handle is a different choice. It has been created to reduce aesthetic intrusion and has a reduced height at the base. It is part of our suited range of hardware and is available in a range of finishes all of which conform to the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They are also compatible with cylinder immobiliser inserts to achieve key-locking status where this is required.

Cockspur Handles

Cockspur handles are typically found on older uPVC or aluminium doors and windows, are a simple latch-and-catch arrangement. The handle nose closes onto or into the catch which is a plastic wedge block that is affixed to the frame of the window. As the wedges are available in various sizes, it is crucial to know the step height you need to buy prior to purchasing the new handle. Typically, uPVC frames have a handle step of 9mm and aluminium frames tend to use 21mm as the step size.

The handle of the cockspur is lockable by using a key, bringing security to your home. The lock is fitted into the handle by using a spindle that fits into the hole of the handle (also called a backset). The spindle is 7mm square in cross-section and is used to either open or close the window.

It is essential to ensure that the new cockspur handle is the same height of the original. It is typically measured from the base spur of the handle to the underside of handle nose. This measurement is sometimes called the stack height or backset. It is essential to know this information before ordering any handle.

Cockspur handles are available in straight/universal, cranked, leftor right-handed models. This allows the handles to be installed on left or right opening windows and also to allow the user easier access to the window.

It is essential to determine whether or not your window needs a restrictor designed to prevent the handle from being opened past a certain level. Generally, they are required for high rise flats or commercial properties for safety reasons. The majority of domestic homes don’t need these.

There are a variety of different styles and colors of the cockspur handle, such as brushed stainless steel and white uPVC choices. Selecting the right one for your windows will depend on your personal preferences and style, as well as how you want your window to perform.

Handles that turn and tilt

Tilt and turn handles are a very popular type of handle, which are commonly seen on double-glazed windows in the UK. Both timber and upvc ones have them. The handle can be rotated at any angle, even 180 degrees. This lets the window be fully opened to the room and can also be lowered for ventilation. The handle is locked in this position and requires an unlocking key whenever needed.

This kind of handle is extremely easy to replace, as it has only one large handle instead of multiple smaller ones. This makes it less obvious the handle and is more in line with modern minimalist design trends. In addition to this they are also much easier to clean than casement windows since the window is able to open inwards and can be cleaned on both sides.

Another benefit of tilt and turn windows is that they are 4 to 8 times stronger than casement windows. This makes them perfect for larger windows as well as doors. The frames are also made of steel, which adds durability and strength.

The tilt and turn mechanism is also safer than that of casement windows, since the handle can be locked at any angle. This is particularly crucial in areas where children could live, as it can keep them from accidentally opening the window.

Tilt and turn windows are a popular option for a lot of homes due to their ability to be utilized in many ways. They can be opened horizontally as a normal window or dropped down to the hopper style. This is a great option for those who wish to improve the airflow in their homes and can also aid in noise reduction. They are also easy to clean and maintain, because the glass is easily removed. They are available in various sizes and colors. These windows are suitable for any house, and can complement both modern and traditional styles.

Crank Handles

Crank handles are simple to operate and offer fantastic views of the outside, without obscuring the glass. They are commonly used in casement windows which hinge on the sides, or awning windows. They are equipped with a mechanism similar to windows, with a linkage arm that supports the window sash that opens and closes by turning the handle in the clockwise direction. Contrary to other kinds of handles that are geared towards windows, a crank window’s mechanism and handle are subject to wear and tear, which could cause the gears to strip and the handle to cease working or fall off of the operator shaft. Regularly checking the handle of the crank and the mechanism for operating it will ensure they remain in good shape for many years.

A crank handle is an arm made of metal that is attached to a perpendicular rotating shaft. The handle is rotated in a circular motion by grabbing it and turning it, much like you would operate a sharpener. In some applications the handle can be operated via a leg.

The base of the crank handle is hollow. It’s this hole that allows it to connect to machinery and equipment. The handle’s arm also includes a connecting rod which transforms the circular motion of the handle into a rotary or reciprocating motion, which is used to operate equipment and machines.

In addition to adjusting equipment and machinery The crank handles are also commonly used on boats to help them be loaded onto trailers. They are typically made of stainless steel, which is resistant against corrosion in marine environments. This is why the majority of boat crank handles are powder coated to protect them from damage and to make them easier to clean.

If your crank handle isn’t working or isn’t able to open the window, it may be time to replace it. Look for Replacement Handles For UPVC Windows trim mounting screws in the track of the window frame. If there aren’t any to be found, you can use a strong putty blade to release the cover by sliding it between window jambs and the frame. If that doesn’t help then you can take it off and access the crank by unbolting screws inside the window frame.