Double Glazing Locks Repair
When a double-glazed windows will not shut, it creates drafts that allow valuable heat to escape. It also reduces your security measures for your home and puts you at risk of burglary.
Over time, double-glazed window hinges, handles and seals can be damaged. If this happens, it could affect how your windows function and invalidate any warranty you have.
Faulty locks
While a lot of people are careful when installing anti-burglar security systems for their gates and main doors but they often forget that windows are the most popular targets for burglars. Having faulty locks can cause drafts inside the home, which can allow valuable heat to escape, and weaken your home’s security barriers.
If your uPVC windows locks do not work, it is likely that the mechanism of the lock is jammed. This is typically caused by the gearbox breaking in one component. This can cause the handle to not open, but to rotate 360 degrees. This is a common issue with uPVC casement windows, but is also present in tilt and turn windows and even sliding sash windows.
When this happens you can release the lock by applying pressure on the lever handle. This will unblock the gearbox and restore the window’s opening. If this doesn’t work, you may need to replace the window lock mechanism entirely.
Most modern uPVC windows use espagnolette locks. These are internal locking systems that secure the window using mushroom-shaped locking cams in the frame keep. The handle operates the gearbox that then triggers the cams to move upwards or downwards. The spindle of the lock could break which causes the handle to move but the door to either open or close.
A damaged transmission could make your window appear locked however it’s not. This is usually the case when the centre rods (sometimes known as crocodile teeth fixings) within the gearbox have broken off. If this is the situation, Misty Glaze can supply and fit replacements for these rods to restore the operation of your window.
It is important to not force a stuck or broken lock. This can cause the lock to break or snap in particular if you are using a upvc repair windows that expands and contracts when temperatures change. To avoid this, it is best to contact a professional locksmith to identify the problem and repair it.
Sticky Doors/Window
Windows and doors that stick are an extremely annoying problem, but they can be a sign of more serious structural problems. It’s important to get professional assistance if you’re having difficulties opening or closing a door or window. The issue could result from a variety of things that include foundation settlement as well as inadequate support for crawl spaces.
Windows and doors can get stuck due to humidity or an issue with the frame itself. When exposed to moisture, wooden frames can warp. This makes opening and closing them a challenge, even if the hardware is in good condition. If this happens the wood expands and pushes against the hinges, creating friction.
If your window or door sticks in the summer and you are unable to get it to close, try using bar soap to reduce the friction. This will allow it to shrink and may resolve the problem temporarily. This procedure will have to be repeated frequently during periods of high humidity.
Sanding the frame of the door or window replacement near me to a smooth finish is a more permanent fix. This can be done by hand or with a power tool. A professional can also sand broken down and stain or paint your window or door frame to make it look new again.
If soaping or sanding don’t aid, the issue could be caused by foundation settlement or a weak crawlspace. Examine for cracks in your area. If you notice these indications, you need to contact a professional in foundation repair. Foundation damage can lead to uneven floors, a misaligned wall and stuck windows and doors. It is important to address these issues as early as possible in order to avoid costly and dangerous repairs in the future. If not addressed these issues can escalate to the point where your entire home is structurally unstable. Contact the Southeast’s top foundation repair specialists to schedule an inspection today!
Cracking/Blowing Issues
When double glazing starts to wear down, it could cause cracks to develop. This can be an unsightly sight, and can also allow the heat inside your home to escape. It can also be a safety risk for your family, since the glass pieces that are sharp can cause injury in the event that they break. It is better to fix any double-glazing window with cracks before they get any worse. This will increase the cost of replacement.
Window seals are essential to prevent drafts from entering the home and keep air between the window panes. However, as time passes, these will deteriorate or shrink due to weather changes. If unchecked it can cause moisture in the home as well as condensation and draughts.
A professional will usually be able to solve this issue. They will be able to replace the seal on your window and bring your windows back to their original condition. They can also recommend options to reduce the chance of future stress cracks, for example trickle ventilation for better ventilation.
You could also try lubricating hinges and handles on your doors and windows. This will enable them to move more easily and allow the lock to function as it was intended. Put some lubricating oils on a lint-free cloth and rub it into the hinges and handle mechanism, and also in the places that they pass through the frame (for instance, sash windows). It is also beneficial to remove handles from the frames and clean them with warm water to rid them of any dirt or grit that has been sunk into them.
It is important to contact an expert when your uPVC doors and windows aren’t working as they should. They can identify the problem quickly, and solve it in a short time. It’s safer and less expensive than trying to fix it yourself and potentially damaging the mechanism. It also gives you peace of mind knowing your home is safe and Broken secure.