Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it’s a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the door and the window is substantial, upvc window repairs you may need to consider an alarm system that includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you’ll need open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you’ve relocated your hinges. If you are happy with the fit of the window replacement, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, upvc Window repairs but it could also be due to the mechanism of the handle wearing out. Fortunately, it’s easy to fix the loose uPVC window handle yourself. You’ll first need to close the window and do an experiment fitting. The corner joints of the sash need to align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Windows that leak water do can not only cause degradation of your home’s structure but also hinder your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to “over-caulk’ as this will only make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc repairs near me window is difficult to open or if it opens with a breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is essentially a simple process but it can be simpler with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Window hinges that aren’t working properly can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to provide suggestions.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, creating gaps where the sash meets frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock may also become disaligned. This is located on the hinge’s side, and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They can help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and there may come the point when it’s more cost-effective to replace them rather than fix them. If you encounter any issues with your window made of upvc, it’s best to consult a professional as soon as possible.