Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is crucial to take the time to ensure that you’re doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan to try to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass has been removed, it’s a good idea to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and Window Replacement near Me repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is significant, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues that include sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It’s crucial to act as soon as you notice your upvc window repairs windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you’ll have to open the window to access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you’re satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you aren’t able to move the hinges you may require replacing the seal. Rubber seals may dry out and window Replacement near me lose their elasticity over time, which causes them to loose their elasticity. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it’s not difficult to fix the loose uPVC window handle yourself. First, you’ll need to close the window and then perform an experiment to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it doesn’t, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for degradation of your home’s structure but also hamper your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC Window replacement near me repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. They can be replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical part, hinges can be damaged over time. It’s very simple to change the hinges on a window but it’s much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused by opening the window improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. First, the hinges due to wear and tear could become misaligned. This will cause gaps to develop where the sash joins the frame. If they’re beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them rather than repair them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.