Double Glazing Locks Repair

If a double-glazed window does not shut, it creates drafts that allow valuable heat to escape. This also weakens the security of your home and puts you at a greater risk of being a victim of burglary.

Over time, double-glazed window hinges, window Doctor handles and seals can become damaged. If this is the situation it could affect the functionality of your windows and cancel any warranties you may have.

Locks that aren’t working

Many people put anti-burglar systems on their main doors and gates, but they often forget that windows are the most frequent targets for burglars. Faulty locks can cause draughts, let valuable heat escape and compromise the security of your home.

If you find that your uPVC window locks aren’t working, there’s an excellent chance that the mechanism for locking is jammed. This is typically caused by an issue with a gearbox component. This could cause the handle to turn 360 degrees, but not open. This issue is typical of uPVC windows, but it can also happen in tilt-and-turn windows as well as sliding sash windows.

If this happens, release the lock by pressing the lever handle. This will allow you to open the gear box and restore the window’s opening. If this does not work, you may need to replace the window lock mechanism completely.

Most modern uPVC windows use espagnolette locks. They are a locking system inside the Window doctor that secures the window by using locking cams that resemble mushrooms which are inserted into frame. The handle controls the gearbox which then activates the cams to move up or down. The spindle of the lock could break and cause the handle to move but the door to either open or close.

A faulty transmission can also make your window appear locked but it’s not. This can happen when the central rods (sometimes called crocodile tooth fixings) in the gearbox have snapped off. Misty Glaze will supply and install replacement rods in the event that this occurs.

It is crucial not to force a broken or stuck lock. This can cause a lock to break or snap in particular if you are using windows made of upvc window repairs which expands and contracts with temperature changes. To prevent this from happening, it is best to contact a professional locksmith to identify the problem and fix it.

Sticky Doors/Window

It’s annoying to have windows and doors that are stuck, but they may also be indicative of more serious structural issues. If you are unable to open or close a window or Window doctor door, it’s important to seek out professional assistance whenever you can. These issues can result from various factors such as foundation settlement and inadequate support for crawl spaces.

Frame problems or humidity could cause windows and doors to become stuck. If your frames are wood for instance, they can warp when exposed to humidity. This could make opening and closing them difficult, even if the hardware in good shape. The wood expands when this happens, and it pushes up against the hinges, causing friction.

If your window or door is sagging in summer you can try rubbing it with bar soap to reduce the friction. This will help it shrink and may resolve the problem temporarily. This procedure may have to be repeated periodically during periods of high humidity.

A more permanent solution is sanding the door or window frame to give it an even finish. This can be done by hand or using the power tool. A professional can also sand, paint or stain your frame or door to make it appear new again.

If soaping or sanding doesn’t solve the problem, it could be due to foundation settlement or a damaged crawlspace. Look for cracks in the area. It’s time to call a foundation specialist if you see any of these indications. Foundation damage can cause uneven floors, walls that are not aligned and doors and windows that are stuck. It is crucial to take care of these issues as soon as you can to avoid costly and risky repairs in the future. These issues could escalate until your home becomes unsafe to live in if it is not taken care of. Contact the Southeast’s top foundation repair specialists today to set up an inspection and repair service!

Cracking/Blowing Issues

When double glazing begins to wear down, it could cause cracks to appear. This can be a snazzy appearance and allow all the heat in your home to escape. It also poses a safety threat to your family as the glass pieces can cause injuries in the event of a break. It is best to fix any double-glazing window with a crack before they get worse. This can increase the cost of replacement.

Window seals are essential to keep air out between your window panes, and also to stop drafts from entering your home. As time passes, these seals will shrink or eventually get damaged because of changes in weather. If unchecked it can cause condensation in the home as well as condensation and draughts.

This issue can usually be resolved by a professional. They can replace the window seal in order to restore your windows to their original condition. They can also suggest features that will reduce future stress cracks, such as trickle ventilation for better ventilation.

It is also possible to try lubricating the hinges and handles on your windows and doors. This will allow them to move more easily and the lock to function as it should. Apply lubricating oil to a cloth that is free of lint and rub it into the hinges and handle mechanism, as well as the areas where they go through the frame (for example, for windows with sash). It may also be beneficial to remove handles from their frames and clean them with warm water to get rid of any dirt or grit that has become stuck to them.

It is essential to speak with a professional if you find that your uPVC doors and windows aren’t working as they should. They will be able to identify the issue quickly, and then fix it in a short time. It’s much safer and cheaper than attempting to fix the issue yourself and could cause damage to the mechanism. It also gives you peace of mind knowing that your home is safe and secure.