UPVC Window Handle Replacement
Replacing a broken window handle is a simple process and, with the right tools, it can be accomplished quite quickly. It is important to identify the handle’s type and spindle’s length prior to purchasing an alternative.
Older uPVC windows have handles with cockspurs, which have an extension spur that can secure a wedge-shaped cockspur striker plate. These can be left- or right-handed and must be compatible when replaced.
What kind of lock and handle do I have?
There are a variety of window handles made of upvc and locks, each having their own benefits and purposes. The type of handle you are using will determine how easy it is to open your windows and if the locking mechanism works according to the plan. With time and regular usage, the window handles made of upvc may become damaged or worn out, replacement handles for windows making them less secure and efficient. In some instances, they could even fall completely off. It is essential to fix your upvc window handles as soon as you begin to notice them falling off. This will help prevent burglaries and will keep your home safe.
It’s an easy task that almost anyone can do. With a few basic tools and the proper knowledge, this is a simple procedure that shouldn’t take longer than a couple of minutes. It is important to know the kind of handle or lock that you have on your window. This will help you choose the correct replacement.
Inline Espagnolette Handles
They are typically found on the outside of the window. They have a flat design and feature a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles also have a spindle that goes through the center of the handle and then into the frame of the window to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames. They have a distinctive, upvc window handle replacement hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame of the window and aren’t as secure as other kinds of window handles.
Handles that tilt and turn
The tilt and turn handles are different from other handles made of upvc in that they can be rotated to open the window and then tilted into the window to allow air circulation. They have a 7mm spindle in the back and are available both in left and right-handed versions.
It is crucial to determine the size of the spindle when purchasing a new upvc handles. Not all of them are the exact same size. To determine the length of your upvc handle simply drop something into the middle of the hole, and then measure how far down it goes before it comes into contact with an obstruction. This is the longest spindle length that will fit in your window.
What is a spindle?
uPVC window handles work in a similar way as doors. By turning the handle, upvc window Handle replacement you will be able to activate a latch inside the frame. The window then opens and shut. However, sometimes these handles can become damaged, particularly when they are used frequently or exposed to harsh weather conditions. This can leave you needing to replace your uPVC windows handles as they may not be able to operate the window in a proper manner anymore.
There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window replacement near me mechanism. This is why it is important to know what type of handle you have on your uPVC window so you can find the right replacement.
The base of the handle will tell you what type of uPVC it is. There should be a “snap in cover over one screw that holds the handle base in the correct position. When you remove this cover, you will be able see the second screw that holds the handle base in place. After both screws have been removed then you should be able to take the handle out of the uPVC.
After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You’ll need purchase a new one that is the same length as the handle that was originally used and the locking device.
The main issue with most uPVC window handle problems is that the spindle gets worn out and cannot longer operate the locking mechanism. This could be due to corrosion, damage due to frequent use, or an unreliable locking mechanism. If this happens, it will be necessary to replace the window handle as well as the locking mechanism to restore full functionality to your uPVC windows.
How do I get rid of my old handle?
Over time and through everyday usage, window handles could be damaged or destroyed, and if this happens, it is important to repair them as soon as you can to ensure the safety of your home. Fortunately, replacing a worn or damaged handle is a simple task that can be carried out in less than a minute and doesn’t require any specialized tools.
The first step to remove the handle that was previously used is to take off the screw located on the top of the base of the handle. After the screw is removed, the handle can be removed. There is a second screw that is located at the bottom of the handle base, and it can be removed as well. Once these two screws are removed, the handle will be detached from the base of the window.
After the handle has been removed, grab the new handle and line up the fixing holes with the holes present in the window frame. There may be a little sticker or caps on the new handle, so take off them if needed and then screw the handle into place. Once the handle is in place it is important to test that it is working by turning the handle and ensuring that the lock mechanism is activated.
Espag handles have a spindle that protrudes from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows come with a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.
Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Once the handle is securely fixated and secured, replace the snap-in cover and screw cap (if necessary). Once the handle is in use, open and close the window a couple of times to make sure it is working properly and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn’t a big deal and the process is actually very simple. You only need a screwdriver and a bit of perseverance. First, make sure the old handle is unlocked. Then, remove any screws that are visible. You can also replace them with screw caps. After removing the handle you’ll need to take note of the length of the spindle that extends from the back. This is crucial since it will determine the type of handle that you will need to buy.
Espagnolette handles on uPVC are the most sought-after kind of handle. The spindle passes through the handle to activate the locking mechanism in the frame of the window. The handle opens the latch, allowing the window to open. When used regularly and time, espagnolette handles may be damaged.
Cadenza handles are a kind of uPVC handle that is usually used in tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are more secure than an espagnolette handles since they only open from the inside. You can replace them using the same method that you would with espagnolette handles however, ensure that the new handle is angled, not flat.
Once you have determined the correct handle to purchase then you can line up the new handle with the existing screw holes and then screw it into the appropriate position. You should then put the screws back on and make sure the new handle is working correctly. This is accomplished by moving the handle from the locked to the unlocked position and the reverse direction a few times. If you experience any issues, it might be worthwhile contacting a professional to see if they can assist in resolving the issue. They can often advise you on the best way to resolve the issue in a quick and efficient way.