Choosing uPVC Replacement Window Handles
Most customers agree that the replacement window handles made of upvc are simple to install and feel as good quality. But it’s important to understand that the type of handle you pick is the one that’s right for your window.
The key factor is the step height that refers to the gap beneath the handle’s nose to the frame or base. Other factors to consider are lockable styles and mechanisms.
Replacement parts
You can purchase a variety of replacement handles made of upvc. There are many styles and colors to choose from, so you’re bound to find something that is compatible with your existing windows. It’s easy for you to buy something on impulse, especially when the handle breaks. So it’s best to check a few things before purchasing an alternative. First, you must be aware of the kind of handles made from upvc you have and what the differences are between them. The table below lists the most common handles to help you select the best one to fit your upvc window.
Espag handles are the most popular and are commonly found on modern double glazed replacement windows glazed windows. They are usually fitted to the frame using two screws which screw in from both sides.
They come with a spindle bar on the back, which can be a variety of sizes and this will determine how they operate (either left or right handed). It is essential to know the measurements of the handle you need to ensure you purchase the appropriate replacement.
Typically fixed by two bolts, similar to the Espag handle, but they are positioned low from the frame which means that the handle will not poke through your blinds. This is a great option when you have blinds for your windows made of Upvc and want to make sure the handle will blend with them.
Cockspur handles look similar to Espag handles, however they have a nose which closes over a wedge which rests on the frame of the window. This type of handle is often found on older upvc windows as well as some wooden windows.
On casement windows tilt and turn handles can be operated by either turning the handle or pressing on the top of window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the fence. They also make a great option for people with restricted mobility and can be a great way to improve security and accessibility at home.
Tips and hints
There are a number of different kinds of uPVC window handles, and many people will have to replace them at some point. If this occurs, it’s a good idea to know a few tips and tricks that will assist in making the task go as smoothly as it can.
Check what type of handle is at your home. Depending on the type of handle and the locking mechanism, it may be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are blocked or getting stuck, you’ll need to replace them along with the handle.
Thankfully, the majority of uPVC handles adhere to industry standards and are alike. This allows for a relatively easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. Once these are removed, you can take the handle apart.
If you’ve got the handle broken from the handle, it’s an ideal idea to take note of how much of the spindle extends from the base of the handle. This will allow you to measure the spindle length for a Replacement Double Glazed Windows (Http://Oy2B33Di2G89D2D53R6Oyika.Kr/) handle. To do this, take a measurement of the square peg sticking out from the bottom of the handle and use this as a guide.
This is particularly important for inline uPVC handles for windows, since they are always straight and will only open to the left or right. They aren’t able to function in the middle. It’s a good idea if you’re not sure of the kind of handle you have in your home, to borrow a handle and see how it functions.
Another excellent method to figure out what the hand of the uPVC window handle is is to simply look at how the handle moves when it is operating. Handed handles will turn either clockwise or counter-clockwise. If you’re unsure, replacement double glazed windows you can always ask someone else to open the window with the handle and figure out how it functions in this way.
Find the spindle’s measurement.
Choosing the correct replacement handle for your windows could be a challenge as not all handles are the same size. It is important to accurately measure the spindle when installing the new handle. This will ensure that the handle fits. There are several different types of uPVC window handles and they work in different ways, therefore it is crucial that you know which kind of handle you have as well as the type of locking system.
The spindle of the handle extends out from the handle’s rear and is attached to the lock gearbox inside the window frame. When you turn the handle, this then turns the lock in the gearbox and opens the window. They are usually utilized on uPVC casement windows and they can be locked with keys to give extra security.
Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by a “nose”, which is secured by a wedge-shaped striker block. They are also relatively simple and they can be locked with keys. It can be more difficult to replace these handles since they aren’t as common as the handles made of espagnolette.
If you have an open tilt and turn uPVC window, then you’ll need to get a special kind of uPVC replacement handle that comes with an additional locking mechanism. It will be able to tilt the window open but also rotate it inwards and outwards to open it fully. You should select the handle with a spindle of at least 55mm in order to be able to reach the window frame.
You can follow the same procedure to remove and replace this type of uPVC handle, but you must be cautious when removing the old one. It is possible to open the window a bit wider than normal to reach both screws that attach it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the proper position then tighten the screw covers and check to make sure the lock is working correctly.
Fit the new handle
Once you have the right replacement handle, it will be easy to screw it into the correct position. It will require a screwdriver and an electric one could be easier. When screwing the screws in, it is crucial not to over tighten the screws as this can cause the handle to warp or crack.
The second step in fitting the new handle is to put in the spindle. The spindle is the part that runs through the handle to operate the locking mechanism in the window. It is vital that it is installed correctly since this will ensure the window can be opened and closed securely.
There are a myriad of different kinds of uPVC handles. These include:
Espagnolette Handles are inline handles that can be used to open tilt windows and turn them.
Cranked Espagnolette Handles: These are like inline handles but have a curved design that is useful for difficult-to-reach windows.
Tilt and turn handles – These are used to operate the opening and closing mechanisms on tilt and turn windows. They also allow for the movement of windows.
These are the most commonly used and the majority of uPVC windows have these in the first place. They are often referred to as ‘Bay Windows in the UK.
It can be frustrating if your uPVC handle fails. However, there is no need to replace the entire uPVC window because of a broken handle. There are several simple ways to fix and replace window handles a damaged uPVC window handle.
You can fix your broken window handle quickly by identifying the type and determining the spindle. When working with windows and tools it is crucial to put safety first. However it is a easy task. It could be the difference between having a secure and secure home, or a window that can be easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, contact Bridgewater Glass. Our team is skilled and knowledgeable to help you with any issues.