Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you’ll need locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you’re planning attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

It’s a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your home until a professional is able to fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the distance between the window and the door is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A window that isn’t properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it’s important to act quickly to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you’ll need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you can’t reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it’s important to replace the seal as fast as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It’s a good thing that it’s simple to fix a loose uPVC window handle yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it’s important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This will only make your window harder to clean and lower its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, UPVC Window Repair Near Me you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it’s more likely to be an issue with the glass seal, rather than the frame or sliding. A Upvc Window Repair near me specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens in an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process, but it’s easier to do with someone else to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to provide suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also be disaligned as a result of wear, causing an opening between the frame and sash. They can be repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. It is located on the hinge’s side, and may need to be cleaned. In some cases it is possible to replace these.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are usually fabric tubes filled with some type of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and upvc Window repair Near Me security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your Upvc window repairs it is recommended to speak with a professional as soon as possible.