How to Get Your Windows Repair Done Right the First Time

A severe storm or a rock thrown by the lawnmower or an accident at home can cause cracks in your windows. You could manage with temporary fixes until a Mr. Handyman of Anne Arundel & North PG professional comes to fix the damage.

The use of clear packing tape or masking tape can prevent superficial cracks such as spider cracks from becoming worse. Be sure to tape both sides of the crack.

Frames that are Rotted

The rot of wood around windows isn’t just ugly and a risk to your safety, it also reduces the insulation value of your home. The frames that are rotten allow cold air to enter your home and warm air to escape, which costs you money. The wood that is rotting lets moisture to enter the frame and causes it to weaken. This decreases the frame’s ability to maintain heat or cool in your home.

A weak window frame can also make your home vulnerable to burglars who will be able to easily break the window and gain access to your home’s interior. Rebuilding and fixing your wooden windows can prevent this type of damage, and make your home more secure and attractive.

If your window sills and frames get rotten, it’s crucial to fix them as soon as possible before the issue gets worse. The first indication of rot is visible cracks in your paint, or spots of discoloration on the wood. The wood might feel soft or mold may build up on the inside of window frames.

If you are experiencing any of these signs you must contact a professional to inspect the damage and fix it as soon as you can. Wood rot can spread quickly and the earlier it is dealt with, the cheaper and easier it will be to repair. If you do not address it until the entire wood is rotting away it will be impossible to fix.

In 95% of cases, rotting frames and sills are repairable if the rot is detected early enough. Our technicians are highly skilled and are able to replace the rotting components of the frame, giving you windows that look like new.

Muntins and Mullions

The mullions or muntins between your window panes serve as more than simply decorative elements. They also support the glass. They are a standard part of windows that can be damaged or broken. They can be fake or real, Window Doctor if your muntins and mullions become cracked, chipped, or damaged, it is essential to repair them, because they could be a major hindrance to the look of your home.

Muntins & Mullions

While they look similar and are often mistaken for one another (perhaps the alliteration aids), mullions and muntins are two distinct components of a window. To avoid confusion and confusion, a reliable window installation company will clarify the distinctions between these two components.

Mullions or dividers are common in multi-paned windows. Historically, they were used to support and divide large sheets of glass. They are used as an ornamental element and Window Doctor as a design for your home.

The mullions on your windows aren’t the most durable however they can provide some security. If a burglar breaks one of your window panes, they’ll probably break the mullion as well to gain entry into your home.

Broken mullions and muntins can be repaired using putty. Window repair professionals clean the surface and apply new putty prior to re-securing them. It’s a relatively simple repair for windows that should not interfere with the functioning of your windows.

There may be a problem with the frame or sashes in the event that your windows leak or don’t close and open properly. Certain sashes are stuck in frames due to broken cords or springs. The sashes might also be too heavy or they could have come off the track. A sash that is hard to lower or raise is usually corrected by balancing the springs and weights.

If you have an older Window Doctor that has one glass pane, the wood strips that keep the glass in place are known as muntins or mullions. If they begin to decay they will require you to rebuild them. Window repair specialists will replace damaged muntins and the mullions with no impact on the functionality of your windows.

One of the most frequent problems with old windows is the sill, which might not slope enough downward to let water drain away. Examine the sill to ensure that it slopes away from the home. If it does not the drip cap can easily be put in place. This simple task can reduce the likelihood of moisture infiltration.

Sashes

If your window sashes are not working correctly, it’s important to look into the issue. Wooden windows sashes can be affected by weather changes and the passage of time. If they are not opened correctly, air or water can easily enter the room. Aluminum sashes may be ineffective due to similar events. Sweating or dampness on the windows is a common indicator of these issues.

The most common cause of problems with sash is simply wear and tear. They can be corrected by sanding and filling the area, and then painting it again. More serious issues will require the disassembly. This task should be left to a professional window repair company.

The sash is disassembled by first removing the locking pins and the sash cords from the window frame. The next step is to remove the parting beads (vertical strips of wood that are holding the upper sash) and then pull out the upper sash. Once the sash has been removed, you can remove and store the sash hardware.

The mortise and tenon joints are held together with wooden pegs. Remove the pegs with a hammer and pin punch. Often one side of the peg is larger than the other and should be driven out from the smaller side to avoid damaging the sash.

There are pockets where the glass panes are tucked after the sash is completely removed. The pockets are typically pinned or screwed into place and must be gently snipped out with a sharp knife.

Once pockets are removed, the sash is then able to be put in new glazing compound. The author beds the sash by holding it up against a homemade easel and working the compound into the groove or rabbet, around the opening of the pane. Once the sash is bedded it is allowed to dry for two days before being reassembled. The sash will then be treated with homemade wood preserver made by mixing mineral spirits and boiled oils from linseed. This can reduce the amount of draughts that enter and improve the ability to close and open the window.

Drip Caps

Drip caps are simple, virtually invisible caps that redirect rainwater away from window doctor near me frames in the event of a storm. They are often constructed of wood, however they may also be created from brick or another type of masonry. Some drip caps sport aesthetic appeal, whereas others are more utilitarian. Whatever the design, a good quality drip cap must be able to withstand the elements and keep water from seeping behind casings, where it can cause wood decay.

With just a few tools and a little knowledge, a drip-cap can easily be installed by a home owner. Many homeowners prefer to hire a contractor to install their drip cap. A drip cap must be nailed around the window, at least one inch away from the trim board and it should slope away from the window. It is important to use galvanized nails, and to apply a premium exterior sealant of the highest quality to the underside of the drip cap as well as the sheathing.

Homeowners can create drip caps at home with a sheet aluminum, a vice, and a few simple tools. To do this the homeowner should first take off or cut a row of siding above the window and then cut a drip cap to a length slightly larger than the window. After the drip cap is cut, it is placed under the tape and nailed with galvanized nails onto the sheathing. The cap must be nailed at both ends and attached to the sheathing.