Double Glazing Window Repair

Over time, fitting double glazing could become problematic over time. For instance, fitting it may be difficult to open windows or have a door that snags. Fortunately the problems can be fixed without difficulty.

Many homeowners attempt to fix these issues themselves. However this should be left to experts. Doing this without the proper tools and knowledge can lead to damage.

Broken Panes

A damaged or broken window can be a gruelling and annoying issue. It could let hot or cold air into your home and leave a gap that allows debris or moisture to get in. This can affect your energy efficiency as your AC or furnace will need to work harder in order to keep your home cool. Depending on the weather conditions and whether you have single-pane or double-pane windows, you may be able to temporarily fix the damage with silicone sealant. However, a permanent fix will require expert assistance.

A damaged window can be repaired with strong-duty tape. A tape strip placed over the crack will stop it from escalating. A crack that is large enough to penetrate the glass, or is too large to cover with tape, fitting will need to be completely replaced.

Broken glass can be caused by numerous factors: a stray pebble from a lawnmower that hits the window; an unintentionally placed drink heavily on a glass-topped table; or a pet’s excited leap when you open the door. The frames of your window could shift over time and break the packaging material that holds the glass sheets.

When you have a broken glass pane, put on thick work gloves and put an empty cardboard box in the vicinity to collect the fragments. Then remove the sash from the frame and work on a flat surface like tables. Wear a mask so as not to breathe the glass fragments.

Once the old glass has been removed, take off any varnish or paint from the window’s frame. You can also use a heating gun to soften any old glazing putty and metal glazing points that were used to hold the glass in the first place.

Then you can determine the opening of the new glass. It is recommended to get your replacement glass slightly smaller than the opening of the original to allow for expansion and contraction. You can ask your local hardware store or your home center cut it according to these measurements.

Once you have your new glass, put it in the frame. If there are any gaps, fill them in with silicone caulk that you can buy from a home improvement store. Smooth the caulk by using a putty blade. Attach glazier’s tips to the corners of the glass frame around every six inches, so that they keep the pane in place.

Condensation

If your double glazing windows are old or new it’s quite common for them to experience condensation. This is particularly the case in winter when colder air is able to meet warmer glass. While it could cause some issues, it’s generally a problem. This is because condensation on windows means that your double glazing is working correctly.

It could be a sign that your seal is failing and moisture is entering the gap. If you notice a milky appearance on your window or if water beads appear across its surface, this needs to be addressed in order to stop the growth of mould, mildew or any further damage.

Luckily condensation can be gotten rid of very easily. A technician will drill a small number of holes in the window frame, which allows the moisture trapped to go away. This process is known as defogging. It may also be used to remove the stains caused by the trapped moisture.

It’s important to keep in mind that defogging doesn’t fix the root issue of a failing seal. In fact, it may not be able to do so even in the event that the condensation is gone, as the compromised air between the panes remains. This could mean that you still not get as much insulation from your windows as you should.

It is important to speak with an expert as soon you notice moisture in your windows to determine the next steps. They may recommend solutions such as adding vents to windows to let fresh air to enter but not allowing warm air to escape.

It is the last thing you need for your double-glazing to go down. This is especially true when it could be costly to replace. With the right skills, equipment and knowledge, you can repair your double glazing and keep it in good working order for many years. If you need repair work on your double glazing call us now to discuss how we can assist. We offer a full range of services including replacing one or more panes of glass to installing energy-efficient upgrades.

Leaks

A leak is a big issue as it indicates that there is a possibility of damp ingress that can cause damage. It’s costly to repair, and it’s often an indication that your house has other problems such as dry rot or mould. It is essential to repair a leak as quickly as you can.

If you notice that your double-glazed windows have a draught, it is likely that the seal has failed. It could also mean there is no longer any gas argon between the panes of glass which is used to insulate the windows. This can be resolved by a specialist technician who will seal the window.

Double-glazed windows can turn cloudy or misty because of dirt. This is usually an indication that the seal is degrading and the glass needs to be cleaned. A specialist can accomplish this by using high-pressure water jets to swiftly clean the glass.

If condensation develops between the two panes in your double glazing, it is an indication that the seal is leaky and that there is not any argon left between the glass. This is a serious issue and means that your double glazing is no longer effectively insulating your home, as it should. The glass can be replaced, but you will need to do it sooner rather than later because the performance of your double-glazed window has been impacted.

If you have double-glazed windows that are under warranty, you should call the installer and report any issues with the units or seal of the glass. It is unlikely that the warranty will be able to address these issues. You’ll lose your warranty if you attempt to repair the units yourself or alter them. This is why we recommend that you use a specialist double glazing repair service.

Weather Damage

Double-glazed windows need a strong frame to hold the glass panes together and ensure they stay in place, particularly in extreme weather areas. Ice, snow, high winds and tumultuous storms can all cause damage to your windows. Call a professional to repair double glazing if you notice cracks, dents or holes.

If you notice water running out of the bottom of your window, this could be a sign that there is a broken seal inside the window. This allows moisture to enter your home. Your upvc repairs window frame or aluminum window frames could be bending or warping. To fix this issue, you’ll need to replace the window seal and then re-insert it into the frame.

Window seals are used to ensure that double-glazed windows are airtight and keep heat from escaping your home, as well as preventing condensation between glass panes. The window seals are generally comprised of uPVC aluminum, timber or aluminum and help to hold the glass in the right place. You can experience problems like draughts and energy loss when the window seals fail.

The inability of the insulating gases in double-glazed windows is a common reason for windows to mist. The argon gas holds the glass in place and makes an airtight seal. However, if the seal is damaged or worn, it could allow the gases to escape. The argon gas could cause condensation between glass panes if it escapes.

The issue can be fixed by replacing the window seal, and then re-inserting glass. You can also apply an anti-fogging product to stop any further condensation. The best way to do this is to contact an expert to do the task for you.

Double-glazed windows are essential, but they can be damaged and need to be repaired. Fortunately, the majority of windows can be restored without the need for replacement. It is recommended to have some basic tools available. You will need protective glove, a tape, transparent film or scotchtape, nail polish and a plastic sheet.