UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a easy process, and, with the right tools, it can be done quite quickly. It is important to know the type of handle and the spindle length before buying the replacement.

Older uPVC windows feature handles with cockspurs, which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be right or left-handed and have to be replaced with the same handle.

What type of lock or handle do you have? I have?

There are a variety of windows locks and handles made of upvc each with their distinct advantages and functions. The type of handle you own will determine if the locking mechanism you have is effective and if it is easy to open the windows. Over time, and upvc window handle replacement with regular use, the upvc handles on your windows may be damaged and worn out. This makes them less secure and less effective. In some instances, they could even fall off completely. It is crucial to fix your upvc window handles as soon as you begin to notice they are falling off. This will prevent potential break-ins and keep your home safe.

Luckily, replacing your window handles made of plastic is a fairly simple job that can be done by everyone. With just a few tools and the right knowledge it’s a simple procedure that should take no longer than a couple of minutes. You will need to know the kind of handle or lock that you have on your window. This will allow you to choose the right replacement window handle.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles feature a spindle that runs through the middle of the handle and into the window frame in order to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame of the double glazed window replacement and aren’t as secure as other kinds of window handles.

Handles that can tilt and turn

In contrast to other handles made of upvc that are tilt and turn, these handles can both be rotated to open the window and the handle can be tilted to the side to allow ventilation. Generally, they have a 7mm spindle on the side of the handle. They are available in both left and right-handed versions.

When buying replacement upvc handles It is crucial to measure the spindle’s length since not all of them are identical in size. Drop something in the middle of the hole to check the length. This is the largest spindle size that will fit in your windows.

What is the spindle?

uPVC window handles operate similarly to doors, by turning the handle to operate an internal latch within the frame. The window then opens and shut. But, at times, these handles can become damaged, especially when they are frequently used or exposed to extreme weather conditions. You may have to replace the handles on your uPVC window if they’re not functioning correctly.

There are many different kinds of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. They are designed to fit in the uPVC frames in various ways. Each handle utilizes a specific spindle to secure the mechanism into the window. This is why it is important to identify the kind of handle is installed on your uPVC window to get the correct replacement.

You can check what type of uPVC handle you have by taking a look at the base of your handle. A snap-in cover should be over the screw that holds the handle’s base in position. Once you remove this you will be able to see the second screw that holds the handle base in position. After both screws have been removed then you should be able to remove the handle from the uPVC.

Once you have removed your uPVC window handle you need to carefully unscrew the spindle that was previously attached to the locking mechanism. Take careful note of the length of the spindle, as you’ll need to make sure that you purchase a replacement that has the same length as the original handle and locking mechanism.

The most common issue with window handles made of uPVC is that the spindle gets worn out and cannot longer work with the locking mechanism. This can be caused by corrosion, damage due to constant use or an unreliable locking mechanism. If this happens, it is necessary to replace the window handle as well as the locking mechanism to restore the full functionality to your uPVC windows.

How do I remove my old handle?

Window handles are susceptible to being damaged or broken over time. It is essential to fix them as quickly as you can to ensure your safety. It is easy to replace a worn or damaged handle. The task can be completed in under one minute without the need for any special tools.

The first step to remove the handle that was previously used is to remove the screw that is located at the top of the base of the handle. Once the screw is removed, the handle can be removed. There is a second screw that is located at the bottom of the handle base, and this can be removed as well. Once both of these screws are removed the handle can be completely detached from the base of the window.

After removing the handle and align the fixing holes of the new handle to the existing holes in the window frame. There may be a little sticker or UPVC Window Handle Replacement caps on the new handle, so take off them if needed and then put the handle in its place. Once the handle is in place it is important to test that it is working by turning the handle and making sure that the lock mechanism is activated.

Espag handles come with an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism within the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the frame’s outer or transom bar cross-member inside the window.

After you have installed the new handle, insert the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle has been firmly fixed. The handle is now ready to use, so try opening and closing the window several times to make sure that it is working properly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn’t difficult, and the process is simple. You’ll need a screwdriver and a bit of patience. First, make sure that the handle is not locked. Remove any visible screws. You could also replace them with screw caps. After you have removed the handle, you’ll need to record the length of the spindle which extends from the back. This is important as it will determine the type of handle that you will need to purchase.

Espagnolette handles made of uPVC are the most well-known type of handle. The spindle runs through the handle to operate the locking mechanism within the window frame. The handle opens the latch and allows the window to open. During regular use and time, handles for espagnolette may become damaged.

Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They have a protruding blade that operates an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. They can be replaced with the same procedure as espagnolette handles however you must make sure that the new handle has a curved blade, as opposed to one that is flat.

After you have picked the right handle, simply align the new handle with existing screw holes before screwing it in place. After that, you can put the screw covers on and test your new handle. This is done by moving the handle from locked to the unlocked position and then back to the locked position a few times. If you encounter any issues, it could be beneficial to speak with a professional to see if they are able to help resolve the problem. They are often able to advise you on the best way to solve the issue in a speedy and efficient manner.