UPVC Window Handle Replacement

Replacing a broken window handle is a easy task and, with the right tools, it can be accomplished quite quickly. But it’s essential to know the handle’s type and spindle’s length prior buying an alternative.

Older uPVC windows have handles with cockspurs, which have spurs that protrude to secure a wedge-shaped cockspur striker plate. They can be right-handed or left-handed and should be matched when replacing.

What kind of lock or handle do you have? I have?

There are a myriad of upvc window sash replacement locks and handles each with their own advantages and purposes. The type of handle you own will determine if the locking mechanism you have is effective and if it’s easy to open windows. As time passes, and with regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and less effective. In certain instances, they might even fall off completely. If you find that your window handles have been removed, it’s crucial to fix them as soon as possible. This will help to prevent potential break-ins and keep your home safe.

The good news is that replacing your window handles made of plastic is a fairly simple job that is achievable by almost anyone. You’ll require a few tools, but with appropriate knowledge, it’s simple and should take only a couple of minutes. To get started, you will need to identify the type of lock and handle you have on your upvc window, which will help you find the perfect replacement handles for windows.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle and into the window frame to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window by only one screw and are less secure than other kinds of window handle.

Tilt and Turn Handles

As opposed to the other upvc handles the tilt and turn handles can both be rotated to open the window and the handle can be tilted to the side to let air flow in. In general, they have a 7mm spindle at the side of the handle. They are available in left and right-handed versions.

When buying replacement upvc handles It is crucial to measure the spindle’s length because not all handles are identical in size. Drop something in the middle of the hole to test the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles operate similarly as doors, with the user turning the handle to open a latch inside the frame. The window then opens and shut. However, sometimes these handles can become damaged, especially if they are regularly used or exposed to harsh weather conditions. This can leave you needing to replace your uPVC handles on windows since they might not be able to operate the window properly for a long time.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in various ways. Each handle has a particular spindle that is used to lock the mechanism into the window. It is essential to determine the type of handle installed on your uPVC windows to ensure that you replace it with the correct one.

You can determine the type of uPVC handle you are using by inspecting the base of the handle. A snap-in covers should be over the screw that holds the base of the handle in place. After removing this and you’ll be able to see the second screw that holds the base of the handle in position. After both screws have been removed then you should be able to remove the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Take careful note of the length of the spindle, UPVC Window Handle Replacement as you will need to ensure that you buy one that is the same length as your original handle and locking mechanism.

The primary issue with window handle problems with uPVC is that the handle spindle gets worn out and can no longer operate the locking mechanism. This could be due to corrosion, damage from frequent use, or a loosening locking mechanism. If this happens, it is necessary to replace the window handle as well as the locking mechanism to restore full functionality to your uPVC windows.

How do I remove my old handle?

Window handles can be damaged or broken over time. It is essential to fix them as quickly a possible to ensure your security. It is simple to replace a damaged or worn handle. The task can be accomplished in under an hour without the need for special tools.

The first step to remove the old handle is to remove the screw that is situated at the top of the base of the handle. Once the screw is removed, the handle can then be pulled away from the base. There is a second screw that is located at the bottom of the handle base, and this can be removed as well. After these two screws have been removed, the handle will be removed from the window’s base.

Once the old handle has been removed, you can take the new handle and line up the fixing holes with the holes currently in the window frame. There might be a small cap or UPVC Window Handle Replacement sticker on the new handle, so take them off these if necessary and then put the handle in place. It is crucial to verify whether the handle functions after it has been installed. Turn the handle and make sure that the lock mechanism is in place.

Espag handles feature a spindle which protrudes from the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and hook over the outer frame of the window or the transom crossmember of the bar.

After you have installed the new handle, slide the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is securely fixed. The handle is now ready for use by opening and closing the window a few times to ensure that it works correctly and securely.

How do I install the new handle?

It’s not difficult to change the handle on your uPVC windows. The procedure is simple. You only need an screwdriver and a bit of perseverance. The first thing to do is ensure that the handle you have previously used is in the unlocked position and then take out any screws that are visible. you can also replace these by screw caps if you need. After you have removed the handle, you will need to note the length of the spindle which extends from the back. This is vital as it will determine what type of handle you need to purchase.

Espagnolette handles are the most commonly used type of handle for uPVC windows. The spindle runs through the handle to operate the locking mechanism in the frame of the window. Once the handle is turned it releases the latch on the window, allowing it to open. In regular use and over time, handles made of espagnolette can become damaged.

Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism inside the window. They are generally more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced using the same method as espagnolette handles, however you should ensure that the new handle has a curved blade as opposed to a flat one.

Once you have decided on the correct handle to purchase, you can simply line up the new handle to the existing screw holes and then screw it in place. Then, put the screw covers on and test your new handle. This is accomplished by moving the handle from locked position to the unlocked and then back to the locked position several times. If you have any issues, it could be worth contacting a specialist to determine if they can help resolve the problem. They can often advise you on the best way to resolve the issue in a fast and effective way.