UPVC Window Repairs

Upvc windows are energy efficient and can aid in reducing heating costs. However, as they get older, problems may arise that require fixing. This could include damaged hinges, handles or locks.

Wooden window repair is relatively straightforward for DIY enthusiasts to complete themselves. It can be cheaper than buying a new window.

Cracks

Cracks and fractures can pose a serious problem. Windows that are not repaired can lead to water intrusion, less effective barriers to cold weather, and even structural damage. It is essential to locate a local repair or builder that specialises in the repair of uPVC frames and has the experience, skills and equipment required to achieve the best results. This will ensure your fracture is repaired quickly before it gets worse and you don’t need to replace your window unit or glass.

There are numerous home remedies that can be used to repair small cracks in glass. Masking tape and super glue are among the most common products that will hold cracked glass in place for a time. For fitted cracks that are more extensive, the tape may need to extend beyond the crack on both sides to get the best results.

Additionally, two-part epoxy can be used to repair broken or cracked glass. Hardware stores typically sell this product for around $10. Make sure your workspace is prepped before mixing the epoxy and make sure you have the right equipment for the job, like a soldering iron.

If your upper or lower sash is difficult to raise it’s most likely due to the fact that the cords on the sash weights have become damaged. It’s an easy fix that can be accomplished using an extension ladder and a flathead screwdriver. Replacing a rotted drip cap is another simple repair that can be done at home. Drain caps that are free of rot are available at a majority of home centers and can be secured with nails and caulked in place with ease. If you have a double- or triple-pane window, make sure to make sure that one of the panes isn’t broken. The reason is because the gases in the space between the windows are responsible for increasing the energy efficiency of the window. This should not be allowed to escape.

Water Leaks

If your uPVC windows are leaking, it can cause damage to the interior of your home and lead to expensive repairs. Water leaks can also affect the structure of your house and can cause mold growth. It’s important to address any problems caused by leaking windows right away to minimize the damage.

One common cause of window leaks is the damage to the sealant around the frame. Utilizing silicone caulk can help bring the condition of the seal back to its normal condition and prevent water leakage. Check for cracks and gaps around the window frame and also the brick or stone wall surrounding your windows.

Another common reason for leaking windows is a blocked drainage hole or faulty flashing. Make sure that the drainage holes have not been clogged or blocked, particularly after a heavy downpour. Also, you should check the windows’ flashing to ensure it is well-sealed.

Finally, it’s essential to make sure that your drip cap isn’t broken or damaged. A drip cap that is rotten or one that is missing will allow water from above to get into your window and cause structural damage. Replacing a leaky drip cap isn’t a daunting task. It’s as easy as purchasing the new one and then nailing it to the.

It’s also a good idea to have your windows checked for water-tightness with a professional. They can employ a specific tool to measure the water-tightness of your windows to ensure they meet the industry standards. If your windows fail the test, they’ll require replacement. It’s a costly repair, but is worth it to ensure the safety and security of your family.

Sagging

If your windows don’t shut properly, it could lead to various issues, including drafts, condensation and a rise in energy costs. It can be an indication that the windows weren’t properly fitted at installation or the sealant is no longer effective. There are several things you can try to fix the problem.

To fix your window properly it is essential to set up a work space that is well-lit. Start by laying newspaper or an old blanket on the floor to shield it from drips or splinters that may come from the window during your work.

You should also use a white cloth which has been immersed in a solution of water and detergent. This will ensure that you don’t leave any color stains on your windows. Note the location of the hinge channel on your uPVC window when you are ready to start working. Unscrew the channel and fill the screw holes inside the frame with epoxy (for uPVC frames) or wood filler. Make sure you scrape the filled hole smooth before it sets.

Install the hinge channel after the holes have been filled. Make sure it’s centered on the window jamb. Also, make sure that you drill the new screw holes about one quarter inch away from the original locations.

Then, measure the length of the spindle that protrudes from underside of the handle and then order a replacement on the internet or bring your old one to the hardware store to purchase a new. Then, remove the setscrew from the shaft. File it flat to allow the set screw to secure onto the shaft. Now, your uPVC window should be closing smoothly.

Broken Hinges

If your uPVC window hinges have been damaged or are not functioning correctly then you’ll find it difficult to open or close the window. This could create problems with security and prevent your home from being cool or warm. It is easy to get a new hinge for your uPVC window. It is essential to select the right type for your windows.

The hinges have to be identical in size to fit in the window frame. The most commonly used hinges for windows made of uPVC are standard 18mm or UPVC 15mm hinges for windows. However, there are specialised types of hinges for windows that can be used on different types of frames, such as wooden frames. The proper hinge can help you avoid common issues with your windows.

There are a variety of reasons your window hinges could have become stiff or loose. The hinges may not have been tightened enough. You can check this using a screwdriver to locate the friction screw at the end of the hinge and then loosen it. After that, you can adjust the hinge by twisting it either way until you get the desired result.

Contact Preston Glass Fix if your UPVC window’s hinges don’t work correctly. We can offer an immediate solution. Our technicians will examine the condition of your window hinges and advise you on the best option for you. We can repair or replace the window doctor hinges, re-tension them or install new locking mechanisms to ensure that your UPVC windows are secure and safe for the long haul.

Faulty Locks

UPVC window locks and mechanisms are a very important part of the security of your home, they make it extremely difficult to open the window without breaking in. When a lock fails it can be a frustrating experience, but it’s an easy repair and you don’t need to replace the entire window.

Often the problem can be a small issue which could have been averted when you had regular maintenance. We suggest that you have your uPVC window cleaned regularly as part of our yearly maintenance plan to reduce the likelihood of any problems.

The majority of modern uPVC windows have espagnolette locks which operate by pushing the nose of the handle across a wedge block and then turning the handle to close the lock. They are efficient in locking the window, but should they not be maintained in a timely manner, they could begin to fail. We recommend applying WD-40 to them a few times a year.

If you notice that your uPVC windows aren’t opening and close as smoothly as they used to or If the lock isn’t functioning properly, it’s likely that there is an issue with the locking gearbox inside the window frame. This is often difficult to access since it requires the removal of the seals that surround the frame of the window and then removing the handle.

A locksmith who specialises in UPVC repairs has the knowledge to identify the problem quickly and be able to repair the gearbox that failed to lock with a exact replacement. This simple and quick fix can save you hundreds of dollars by avoiding having to buy new windows.