UPVC Window Handle Replacement
It’s simple to repair a damaged window handle with the right tools. It is important to know your type of handle and its spindle’s length prior to purchasing the replacement.
Older uPVC window handles have a spur which protrudes and locks over the wedge striker for cockspur. These can be left- or right-handed, and must be compatible when replaced.
What kind of lock or Window Handle Replacement handle do you have? I have?
There are a variety of window handles made of upvc and locks, each with its distinct advantages and functions. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism works according to the plan. With time and regular use, upvc window handles can become damaged or worn out, making them less secure and efficient. In some instances they could even fall off completely. If you find that your window handles have fallen off, it’s important to fix them as soon as possible. This will help avoid burglaries and protect your home from burglary.
It is a good thing that replacing your window handles made of plastic is a simple task that can be completed by almost everyone. With just a few tools and the right knowledge, this is a simple procedure that should take no more than a couple minutes. You will need to know the type of lock or handle you have on your window. This will help you select the right replacement.
Inline Espagnolette Handles
These are the most common type of upvc handles and are usually located on the side of your window. They are flat in design and have a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles have an elongated spindle that runs through middle of the handle to the window frame in order to operate the latch.
Cockspur Handles
They are usually found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are fitted with a single screw that secures the handle to the frame of the window and are not as secure as other types of window handles.
Tilt and Turn Handles
In contrast to other handles made of upvc the tilt and turn handles can be rotated to open the window and turned inwards to allow to let air flow in. They feature a 7mm spindle on the back and are available both in right and left-handed versions.
When you are purchasing replacement handles for upvc It is crucial to measure the spindle’s length since not all of them are the same size. Drop something in the middle of the hole to measure the length. This is the length of the spindle that will be suitable for your window.
What is the spindle?
uPVC window handles operate in a similar manner to doors. By turning the handle, you are able to activate a latch inside the frame. The window is then opened and shut. These handles can be damaged, particularly if they’re frequently used or subjected to harsh conditions. This could mean that you have to replace your uPVC windows handles as they may not be able to operate the window properly for a long time.
There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window screen replacement mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows so that you can replace it with the correct one.
You can find out what kind of uPVC handle you are using by taking a look at the base of the handle. A snap-in covers should be over the screw that holds the handle’s base in place. Remove this and then you should be able see the second holding screw located at the opposite end of the base of the handle. After both screws are removed you should be able to pull the handle away from the uPVC window.
After taking off the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You’ll need to purchase a replacement with the same length as the handle that was originally used and locking device.
The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage from constant use or the locking mechanism becoming looser. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I remove my old handle?
In the course of time and daily usage, window handles could be damaged or destroyed, and if this happens it is essential to fix them as soon as you can to ensure the security of your home. Fortunately, replacing a damaged or worn handle is a fairly simple job that can be completed in less than one minute and doesn’t require any specialist tools.
To remove the handle, first remove the screw that is located at the base of the handle. After this screw is removed, the handle will be pulled away from the base. A second screw is located at the bottom of the handle. This can also be removed. When both screws are removed, the handle can be removed from the base of the window.
After removing the old handle and align the fixing holes of the new handle to the existing holes in the window frame. There may be a little sticker or caps on the new handle, so remove these if necessary and then screw the handle into place. It is essential to ensure that the handle works once it is put in place. Turn the handle over and make sure the lock mechanism is in place.
Espag handles have a spindle which protrudes from the handle and slot into the multipoint locking mechanism that is on the window frame. Cadenza windows have blades with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross member within the window.
After you have installed the new handle, slide the spindle into the window lock and tighten it. When the handle is fixated then replace the snap-in cover and the screw cap (if necessary). The handle is now ready for use, so try opening and closing the window a few times to check that it functions correctly and securely.
How do I fit the new handle?
Switching your uPVC window handle isn’t a big deal and the process is quite simple. All you need is a screwdriver and a little bit of patience. The first thing to do is to ensure that the handle is in the unlocked position and then remove any screws that are visible, you can also replace them with screw caps if needed. After removing the handle you’ll need to record the length of the spindle that extends from the back. This is crucial as it will determine what kind of handle you will need to buy.
Espagnolette handles are the most commonly used type of handle for uPVC windows. They have a spindle which runs through the handle and operates a locking mechanism within the frame of the window. Once the handle is turned it releases the latch on the window, allowing it to open. As time passes and with regular use, espagnolette handles can be damaged or destroyed, making it necessary to find a replacement.
Cadenza handles are a form of uPVC handle that is commonly used with tilt and turn double glazed windows replacement. They have an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. You can replace them using the same method as you would do for handles made of espagnolette however, make sure that the new handle is not angled and flat.
Once you have determined the right handle for Window Handle Replacement you, you can simply place the new handle to the existing screw holes, and then screw it into place. After that, you should put the screws back on and make sure the new handle is working properly. This is accomplished by moving the handle from the locked to the unlocked position and then back to the locked position several times. If you encounter any issues, it may be worthwhile contacting a professional to see if they can help resolve the problem. They can often advise you on the best way to resolve the issue in a quick and efficient way.