Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They don’t rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

After the glass has been removed and UPVC window repairs the glass is removed, it’s a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is substantial, you may want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. It’s important to take action as soon as you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you’ll have to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you’re satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it’s essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. Luckily, it’s not difficult to repair the loose uPVC window handle yourself. First, you’ll need to shut the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn’t then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it’s crucial to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to ‘over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it’s more likely to be a problem with the glass seal, rather than the frame or sagging. A upvc window repairs specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window doctor near me is essentially a very simple process but it can be easier when you have a person to help you hold the frame in place.

Verify that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us a photo through our website can often resolve the problem. We are more than happy to provide advice.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. First, the hinges because of wear and tear, can become misaligned, this causes an opening to appear where the sash joins the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can be disaligned. It is located on the hinge’s side and upvc window repairs may need to be cleaned. In some instances it is possible to replace these.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.

One of the most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your window made of upvc, it’s best to consult a professional as soon as you can.