UPVC Window Repairs

Upvc windows can cut heating costs and are energy efficient. As they get older, however, issues may develop that need to be fixed. This can include faulty hinges, handles, or locks.

Wooden window repair is relatively straightforward for DIY enthusiasts to do themselves. It’s cheaper than buying a new window.

Cracks

Cracks and breaks can pose a serious problem. Leaving them unrepaired can lead to water ingress and less effective protection against cold weather and even the risk of structural damage. Find an expert local builder that specializes in repairing uPVC frames. They must possess the necessary knowledge and experience as well as the right equipment to get the best results. This will ensure that your crack is repaired before it gets any worse and that you don’t need to replace the window glass or window unit.

Small cracks in glass can be repaired by using a variety of home-based solutions. Superglue and masking tape are two of the most commonly used products to hold cracked glass in position for a short duration. For more severe cracks, the tape may require to be extended on both sides.

You can also make use of two-part epoxy to fix damaged or cracked glasses. Hardware stores typically sell this product for UPVC repairs about $10. Make sure that your workspace is ready before mixing the epoxy. Also, ensure you have all the equipment required to complete the task.

If your upper or lower sash isn’t lifting easily it’s most likely because the cords that connect the sash weights have become damaged. Fortunately, this is an easy fix that can be accomplished with the help of an extension ladder and a flathead screwdriver. Replacing a rotted drip cap is another simple repair that can be completed at home. Many home centers stock a drip caps that are not rot free and can be easily caulked or nailed to be fixed. If you have a double- or triple-paned window, be sure to make sure that one of the panes are not broken. This is due to the gases that are filling the space between the panes are responsible for improving energy efficiency and should be retained and not released.

Water Leaks

If your uPVC window is leaking, it can ruin your interior and result in costly repairs. Water leaks may also cause structural damage to your home as well as mold growth. To avoid damage, it’s important to repair any issues caused by leaky windows as soon as you can.

A damaged sealant around window frames is a frequent reason for leaks. The use of silicone caulking can bring the condition of the seal back to its normal condition and stop water leakage. Look for gaps and cracks around the window frame as well as the brick or stone wall surrounding your windows.

Another reason that can cause leaks in windows is blocked drainage holes or a defective flashing. It’s important to check that the drainage holes are free and free of obstruction, particularly after a heavy rainstorm. You should also examine the windows’ flashing to ensure that it is well-sealed.

It’s also essential to check that your drip cap does not have any rot or is missing. A rotten drip cap or one that’s missing can allow water from above to get into your window and cause structural damage. Replacing a drip cap isn’t difficult and typically a simple task of purchasing an entirely new one and nailing it into place.

It’s also a good idea to have your windows tested for water-tightness by a professional. They can use a special tool to measure the water-tightness and strength of your windows and make sure that they meet industry standards. If your windows don’t pass the test, you’ll need to replace them. It’s an expensive fix however it’s worth it to ensure the safety and comfort of your family.

Sagging

If your windows aren’t closing properly, it could lead to various problems, such as drafts, condensation, and an increase in energy costs. It could also mean that the windows weren’t installed correctly or the sealant is worn out. Fortunately, there are some options to fix the issue.

To repair your window correctly it is essential to set up a workspace that is well-lit. Start by laying newspaper or an old blanket on the floor to protect it from any splinters or drips that could be leaking from the window as you work.

Use a white cloth soaked in a mix of detergent and water. This will ensure you don’t leave any color stains on your windows. If you’re ready to start working on your uPVC windows, begin by making a note of where the hinge channel must be located. Unscrew the channel, and then fill the screw holes in the frame using epoxy (for uPVC frames) or wood filler. Be sure to smooth the hole that you have filled before it sets.

Install the hinge channel after the holes are filled. Be sure to place it on the window jamb and then drill the new screw holes about a quarter-inch away from the original locations.

Then, take a measurement of the spindle that protrudes from the underside of your handle. You can request an replacement or take it to a hardware shop for a replacement. Then, remove the setscrew from the operator shaft. Flatten it to allow the set screw to secure onto the shaft. Now, your upvc repairs windows should close smoothly.

Broken Hinges

It will be difficult to open or closing your uPVC windows if the hinges are broken or aren’t functioning correctly. This could create problems with security and prevent your home from being cool or warm. It’s simple to find a new hinge for your uPVC windows. But, it’s crucial to make sure you have the right type of hinge for your windows.

The hinges must be the same size to fit in the frame of the window. The most commonly used hinges for windows made of uPVC are standard 18mm or UPVC 15mm hinges for windows. However, there are special types of window hinges for different types of frames, like wooden frames. Choosing the correct window hinge for your windows will assist you in avoiding the common issues that homeowners have with their windows, such as not closing properly.

The hinges on your windows may be loose or stiff for several reasons. The most common reason is that the hinges are not properly securing. You can test this with a screwdriver. locate the friction screw on the other side of the hinge and then loosen it. You can then adjust it by turning it in either direction.

Call Preston Glass Fix if your UPVC window’s hinges aren’t working correctly. We can offer a quick fix. Our experts will assess the condition of your window hinges and provide you with the best option for you. We can replace your window hinges, re-tension them or install new locking mechanisms to ensure that your UPVC windows are secure and safe for a long time to come.

Faulty locks

UPVC window mechanisms and locks are a crucial part of security for your home. They make it difficult to open a window without breaking into the house. When a lock fails, it could be frustrating, however it is a quick and simple fix and you don’t need to replace the whole window.

Often the problem can be a small issue that could have been prevented if you have had regular maintenance. We recommend that you have your uPVC window serviced regularly as part of our annual maintenance package in order to reduce the likelihood of any issues.

Modern uPVC windows come with espagnolette locks which operate by pushing the handle’s nose across a wedge block then turning the handle to close the lock. They are extremely efficient in keeping windows secure, but over time they can start to fail if they’re not properly maintained. We suggest applying WD-40 to the lock a couple of times per year.

If you notice that your uPVC windows don’t open and UPVC repairs shut as easily as they used to or when the lock isn’t functioning properly, it’s likely that there is an issue with the locking gearbox inside the window frame. This can be difficult to access since it requires the removal of the seals around the frame of the window and then removing the handle.

A locksmith that specializes in UPVC repairs has the knowledge to diagnose this fault quickly and then be able to replace the failed locking gearbox with a exact replacement. This is a fast and easy repair that can save you hundreds of dollars by not having to purchase new windows.