Double Glazed Window Doctor Repair

Double glazing is a great investment in energy efficiency. It prevents loss of heat in the winter months and helps keep your home cool in the summer. Restoring your double-glazed windows as needed is a great way to ensure they are in good condition.

Over time condensation and misting may be detrimental to your double-glazed windows. This can cause your double-glazed windows to be difficult to open and close.

Broken Panes

A stray ball, a flying pebble from your lawnmowers or even a severe storm could break the double panes of your windows and expose your home to the elements. Although a window that is cracked can be difficult to fix, you don’t have to replace it completely. The insulated glass between two panes of glass is in good condition and you can fix your double-paned window on your own.

You’ll first need to remove any broken glass from the frame. Be careful to keep glass shards from falling to the floor or falling off the frame. Use a pair of gloves to protect your hands and a rag to cover the area around the broken glass to avoid further cuts or breakage. After removing the broken pane, carefully clean the entire frame of the window to remove any remaining sealant or debris. Sand rough areas of the window frame to create a smooth surface on which to install your new window replacement near me.

After cleaning the frame, you can apply another layer of glass to the seam where you removed the broken pane. This is the most effective method to seal and protect your window. It will also reduce your energy bills by preventing drafts and water from entering your home. The next step is to choose your glazing material. There are many options available such as clear tape, window doctor which is more durable than regular tape and helps prevent further cracking of your window, or glazing film that is similar to clear plastic wrapping. This type of wrap has the advantage that it can be painted to match your frame and can also shield your windows from rain and ice.

Whatever material you use, it’s important to press the glaziers points into the seam where the putty meets your frame. They will help hold the new glass in place and assist it to adhere to the frame. Glazier’s points can be found in hardware stores, and are available in pre-made ropes that you roll over the frame rabbets.

Condensation

If you have a problem with condensation, it’s best to call the window manufacturer. Many companies offer warranties and guarantees that will cover these issues. Fogging or condensation on the windows’ panes is a sign that the seals are damaged. Only a professional can resolve this problem by replacing the panes.

It’s a difficult procedure that requires specialized tools to remove and replace the window. A professional can handle this task and supply the equipment. It is recommended to leave the task to a professional. These tools could be hazardous.

Wear safety gloves and glasses if you choose to do it yourself. You could be exposed to flying glass fragments. It is also essential to remove all the putty and metal glazing points from the grooves in which the new window will go. Wire-brushing the frame or vacuuming a damp cloth are also recommended. After the frame is dry, you’ll need to order an additional piece of glass that is 1/8″ shorter in both directions than the existing window. Check the glass’s fit into the grooves.

Based on the frame you have depending on your frames, you’ll need to apply the caulk to the grooves in order to ensure that your new pane is secure in the right place. After the caulk dries it is time to smooth it and make any needed adjustments. Then the wood molding can be reinstalled.

If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause the frames of double-glazed windows to expand or shrink, causing them to sag and stick. If this is the issue try wiping down the frames with water and lubricating the joints. However, it may be a good idea to call the company that installed your windows for assistance.

Misted

When moisture gets trapped in between the glass panes, it can cause misty double glazing. Double glazing is made up of two panes that are separated by a space that is filled with argon to improve thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside which allows you to keep the temperature comfortable in your home.

The seal may become damaged over time and water can accumulate between the glass panes which can cause them to turn to become cloudy. This happens because the space between the panes gets heated by the sun, which causes water vapour to build up within it.

This is a natural occurrence however, if it happens between the windows’ panes it can be a problem because it will no longer be able to regulate the temperature in the room. Instead, the temperature outside the window will affect the temperature inside. If you notice your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single blown sealed unit without the need to replace the entire window. This is more streamlined than a total replacement. Our misty window repair involves removing the glass unit, washing it, then replacing it with a fresh one to create an airtight seal.

There are companies within the industry who claim to drill holes into your windows with mist and inject chemicals into them which they say removes the fog & condensation however, we don’t recommend this method. This is not only ugly, but it can also damage the toughened glass and can result in windows that do not completely perform the function it was intended to.

If you don’t fix the problem immediately it could cause mould, which could not only damage the window, but also pose health risks to your family members. Moisture can also cause other issues within your home, like dampness or rot. In certain cases the window might need to be replaced completely.

Blown or failed

Double-glazed windows are made up of two glass panes with an air or inert between them. This increases their thermal efficiency by keeping heat in and cold out. Over time, the gas can depressurize, leading to a number of problems.

One of the most frequently encountered is condensation between the panes. It’s not an indication of a window failing however it could indicate that you need to reseal them. Condensation is also an indication of broken double glazing, which could need to be replaced.

You should also look out for draughts that are coming from the double-glazed windows. It could be due to an issue with the seal or a damaged handle lock. It is important to fix the issue as quickly as you can. A draught will cause you to spend more on heating. Test the seals around the window frame by smelling cold air.

You will also notice water beads on the inside of windows if your window seals aren’t performing as they should. This is a clear indication that you will need to replace the seals on your double-glazed windows.

Your window frames are designed to move a little bit, as they need to do to keep the glass sheets in their place. Over time, this special packaging material could become compacted. This will result in the seal being broken. This will allow the air to circulate between the panes, decreasing the energy efficiency of your window.

Double glazing that has broken an air seal is an indication of failure and should be fixed as soon as possible. A blown seal will stop your double glazing performing its primary function that is to keep the cold out and warm air in. Additionally, a blown seal can let moisture in, which can cause mold and other unpleasant conditions. You should call a double glazing repair expert as soon as you notice a blown seal in your double glazed windows, as they can replace the entire unit.