How to Replace a UPVC Window Handle
Don’t panic in the event that your upvc window handle is broken. Replacing the upvc handle on windows is a straightforward task that can be done in just a few easy steps.
No matter if it’s an in-line or a cranked espagnolette window handle they all have an elongated spindle that extends from the back plate. This spindle is then slotted into the locking device.
Identify the lock type and handle
Over time, window handles and locks can become damaged or lose their functionality. The good news is that this can usually be fixed without having to replace upvc window handle the entire window unit made of uPVC. One of the first things you need to do is identify the type of lock and handle you have to determine the parts will be required for replacement.
Identifying the type of handle is done by looking at the base of the handle. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing it could be a sign the handle is separated from the base section. If the handle has been split in the middle and no longer grips onto the spindle, this could also mean that it needs replacing.
There are many uPVC handles, but the Espag handle is the most popular. They are usually fixed using two bolts, and come with an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are usually used on uPVC tilt and turn windows.
Cockspur handles are another type of uPVC handle. They’re similar to Espag handles, but have lower projections from the frame. These handles are typically used on older uPVC window frames.
Venetian window handles are a different alternative. They are similar to Espag handles, but have an elongated bottom that lets them to be positioned in a flush position with the frame. They are a great option for homeowners looking for an elegant, stylish handle that blends with their uPVC window frames. They are also available in a large range of colours to match any style.
Measure the spindle
Before you purchase a new handle, it’s important to understand how the original is attached. This will tell you whether it’s tight enough or loose and if it will fit inside the window frame. This can be determined by identifying the handle’s type and measuring the spindle. The spindle is the steel shaft that connects the handle to the lock within the window frame. It’s available in various sizes and the current industry standard being 8mm. Older handles could have a cross-section of 9mm, so you’ll have to measure your old handle to make sure you get the correct size replacement.
There are a variety of window handles. However, the most popular are inline Espagnolette and cockspur handles. These handles operate a locking mechanism in the window. They use shootbolt rods to lock the window after it has been closed. Depending on the type of handle they are secured in place using screws or pins.
You can find replacement upvc window handles on the internet and in many DIY stores. They come in a range of finishes and are suitable for new or replacement windows. For extra security they can be key-locking or a non-locking fire escape.
To take off the handle, simply open the window towards the door and then remove all the screws holding it in place. Store the screws in a container to protect them from damage. After the screws have been removed, carefully remove the handle and replace Upvc Window handle measure from the base to the tip of the spindle. This will provide you with the information needed to buy the correct replacement. The spindle of the handle is the metal shaft that connects it to the lock gearbox within the window frame.
Remove the old handle
Switching a uPVC handle is a simple task that takes just five minutes if you’ve got the right tools. The first step is to identify the type of lock and handle, which will help you find the correct replacement. Then, you can measure the spindle to determine if the handle is suitable. The old handle needs to be removed and replaced with the new.
Most uPVC handles come with inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism of the window. They are generally simple to take off, but you may have to apply force to remove them if they are stuck. There are usually two screws that hold the handle in place, which can be removed with the help of pliers or a screwdriver. There may be a need to remove pins, depending on the kind of handle.
After removing the screws you can remove the handle you were using previously. If the handle is unlocked the top of the baseplate will be visible. It will reveal two screws that can be unscrewed. There’s also small silver or another colour sticker that needs to be removed if it’s still in place.
You can now screw into the new handle using the screws that came with the old handle. Align the screw holes on the window to the holes in the handle. After you have done this, replace the caps on the screws. Test the new handle. Changing a uPVC window can be a quick and simple task, but it’s crucial to make sure you complete the task correctly.
Fit the new handle
It’s time for you to install your new handle if it has been successfully removed the old handle from the frame. Begin by finding the screw covers and then lifting them out using your screwdriver. Once the screw covers are removed, put them in a safe place before proceeding to the next step.
Next, put the new spindle in the handle by lining it up with the hole in the handle and screwing it into. Be sure to align the holes of the handle with those in the window frame. You should use a screw that is identical to the one used before or it could result in the handle not being secure.
uPVC Espag handles are equipped with a square 7mm spindle that rotates the lock mechanism installed to the window. This type of handle is utilized in most modern uPVC Windows. uPVC Cockspur (also known by the name Cotswold) handles have an extended, curving nose that locks onto the frame’s outer or cross member of the transom bar. They are usually seen on older uPVC windows.
Once the new handle has been put installed, it is important to test that it works correctly by locking and unlocking the window several times. If everything goes according to plan, your replacement uPVC window handle should now be properly attached and running smoothly. If not, the steps above will allow you to identify any problems and resolve it quickly. If you’re having trouble with your uPVC handle or any other issues with your home improvement using glazed do not hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are able to repair or replace window pane different window frames and handles. This makes us an excellent choice for double glazed window replacement glazing.
Test the new handle
Over time, uPVC handles be damaged and worn out. It can make them less secure and efficient and therefore it is essential to replace them right away. It’s also a good idea to do this after you upgrade your windows, because changing your lock and handle will help maintain the integrity of the windows you have just bought.
There are a variety of styles of uPVC window handles. Some are secured to the frame with pins or screws, while others are fitted with blades that slide into the lock mechanism. Each type has its own method of replacement, therefore it’s crucial to know what type you have before you start working on it.
Espag window handles are the most popular type, and they’re typically used on newer uPVC windows. They have a spindle that extends out from the handle and into the gearbox for locking and, when you open the window it triggers the locking mechanism. They’re also easy to remove however, you must take care not to damage the mechanism or the handle while taking them off.
Cockspur window handles are a popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the striker plates in the shape of wedges on the frame. This type of handle can be more difficult to fix than other handles, but it’s an excellent choice for the majority of homes.
Venetian window handles are secured by two bolts and feature an elongated projection from the frame, which is not the case with the Espag handle. These handles are perfect when you want to have a flush-fitting handle that blends in with uPVC window frames. They’re a great choice for commercial and residential buildings.