Replacement Upvc Window Handles

Most replacement upvc window handles include everything you require, however if the previous handle had screws or pins that held it in place, they will need to be removed. Remove the’snap-in’ cover at the base of the handle.

The next step is to determine what kind of window and lock that your new handle for – this is crucial!

Espag

Espag handles are a multipoint lock that is used to secure casement windows such as uPVC and wooden double glazing. The handle has a 7mm square shaft that fits into an internal gearbox that is mounted on the uPVC window. When the handle is turned, it will activate a series of locks around the perimeter of the window. Espag handles, also known as shootbolts, provide more security than the single point locks found on older frames.

They are available in a number of different options such as inline and cranked handles that can be used either left or right-hand operation. You can even find a range of sleek ergonomically designed handles that are designed to enhance the feeling of the handle and the way it appears on your windows.

You’ll need to measure the size of the spindle from base of your uPVC handle if you want to order the correct replacement. This measurement, known as the step height will help you select the best uPVC window handle for your home.

You may need to remove any screw covers that are protecting the screws that hold the handle in place and if that’s the case, you can use a screwdriver to remove these or pliers to remove the pins that hold the handle. After removing the pins or screws that hold the spindle in place then you can remove the handle.

When you have the handle removed, you’ll be able to access the locking mechanism inside the frame of the window and remove the wedge block cockspur that is attached to the handle, allowing the window to open. The new uPVC handles you ordered should be able to slide over the cockspur block, and then into handle spindle to allow the window to open again. The ideal solution is to replace the cockspur wedge block with an entirely new one when you change your uPVC handle to ensure that it is properly secured.

Cockspur

Cockspur handles are generally found on older uPVC and aluminium windows. The handle turns and closes on the receiver, which is a wedge-shaped plastic catch (not to be confused with window latches made from timber which are also handled in this section). The handles are lockable or nonlockable. They are available in a variety of nose heights that can be adjusted to the frame.

The handle is locked by a small triangle-shaped spur (spur) which is fixed to the frame. These are usually single-way handles, however the deadlock that locks can be added to give additional security.

The replacement cockspur handles are simple to install. All you require is the correct backset and a new set (supplied). The backset is measured from the baseplate to the underside nose of the handle. As a general rule Aluminium window frames typically have a backset of 9mm, whereas UPVC employs a 21mm. There are many variations, so it’s essential to measure before buying the handle.

This kind of window handle can be substituted by simply removing the existing handle and removing the spindle, or in certain cases the whole handle assembly. The replacement handle can then be screwed in place using a pair of pozidriv screws. The pozidriv screws can be purchased in a brass or zinc finish to match the existing hardware, and there is the option of a locking version that self-locks.

This cockspur handle is easy to install and is perfect to replace or repair old uPVC Windows. They are a universal design that makes them suitable for all profiles and backsets. Each handle has three packers, each having different thicknesses. They are slid on the underside of the handle noses and can be combined to make backsets as tiny as 9mm or as high as 21mm. They are available in right and left handed versions and come in either lockable or nonlockable models with a variety of nose heights.

Tilt and Turn

Tilt and turn windows are a premium European window replacement panes design that has been in use for a long time in Europe but is just starting to catch on in the US. They combine the functionality of three different window styles into one: tilt, pivot and in-swing. This makes them suitable for older homes as they can be used to provide a greater level of ventilation than traditional window types.

When tilt and turn windows are closed, they will lock as any other fixed window. But, by turning the handle 90@ or 180@ (depending on the kind of tilt and turn window) the sash can be opened inward and the window can be tilted in order to allow air circulation through the space at the top of the frame. This is a great method to allow ventilation without having to open a large window, which could pose a safety risk if not properly secured when opening.

The sash can be opened fully by turning the handle 90@ or 180@. This permits complete air circulation which is especially beneficial in rooms with a lot of draft or where smells or smoke can accumulate. This makes it easier to clean the outside of the glass by doing it from inside your home. This is a job that often requires a lot of risk.

Tilt and turn windows are extremely secure. When they are locked in the closed position they are difficult to open from the outside, and they feature double seals to prevent rainwater from getting into the home when they are in the tilted or in-swing position. This can be a particularly helpful feature for older homes where burglars are more likely to target windows that can be opened via the side hinges.

Spade

There are many types of window handles that can be installed to double-glazed windows made of upvc. The two most popular types are Espag handles and Cockspur handles. There are also tilt and turn handles, spade or blade handles, and monkey tail handles. The kind of handle you pick will depend on the style you prefer and the kind of windows you have.

To select the appropriate replacement for your upvc window handle, it is important to know how your existing handle is fixed to the frame. This is known as handing and is an essential element to consider, particularly when buying online as some handle variations don’t fit all windows. Some handles, for example, are angled while others are straight, and Replacement Upvc Window Handles can be turned left or right. You should also know what the spindle’s length is that is the distance from the base of the handle to the tip of the handle.

Identifying if your windows need a restrictor is also essential when choosing the right handle. These are typically found in high-rise apartments or commercial properties, but they’re not a requirement for the majority of homes. Lastly, you should also take into consideration step height, which is the distance from the top of the screw plate to the nose of the handle.

Spade is the word from Old English spadu or spaedu and has been translated in many languages including German spaten and Low German Spathen. In the 1920s during the Harlem Renaissance in New York City spade started to be used as a derogatory term for black people. Since the time, the word has become an emblem of African American pride and heritage.

It is important to get the correct size when replacing a handle made of Cadenza. The handles are available in angled and straight versions which differ by only a few millimetres. The handle head is available in a variety of designs, including the T or D shapes. It can also be left unhandled.