Choosing upvc replacement window Handles (www.koreafurniture.com)
The majority of customers agree that upvc replacement glass for windows handles are easy-to-install and feel great. However, it is important to realize that the kind of handle you select is the one that’s right for your window.
The primary factor is the step height that refers to the gap beneath the handle’s nose to the base or frame. Other factors to consider are lockable styles and mechanisms.
Replacement parts
You can purchase a range of replacement upvc handles. There are a variety of styles and colors to choose from, so you’re bound to find something that matches your windows. It’s easy to make an impulse purchase especially when the handle breaks. Therefore, it is best to look over a few aspects before purchasing the replacement. The first thing to think about is the kind of upvc handle do you have now and what the difference between types is. The table below lists the most common handles to help you choose the one that will suit your window made of upvc.
The majority of double-glazed windows have handles that are epag. They are usually fitted to the frame with two screws which screw in from above and below.
They have a spindle bar at the back that can be of a variety sizes, and this will determine how they work (either left or right handed). This is why it’s essential to determine the handle size in order to make sure that you’re ordering the correct replacement.
The arm is secured to the frame using two bolts, much like the Espag handle. The arm is curved at a low angle to ensure that it doesn’t scratch your blinds. This is an ideal choice when you have blinds on your windows made of upvc and want to make sure the handle will blend with the blinds.
Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the window frame. This type of handle can be found on some older wooden and Upvc windows.
On casement windows the tilt and turn handles can be operated by turning the handle or uPVC Replacement Window Handles pressing the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or walk across the garden fence. They’re ideal for those who have mobility issues, and can improve security and access in the home.
Hints and tips
There are a number of different types of uPVC window handles, and a lot of people will find themselves replacing them at some time. If this occurs it’s best to know a few hints and tricks that will make the process be as smooth as it can.
The first thing you should do is to determine what kind of handle you have at home. Depending on the type of handle is connected to and the locking mechanism it is using it might be necessary to replace the entire handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed and sizing, you’ll have to change them as well as the handle itself.
Fortunately, the majority of uPVC handles adhere to industry standards and are very alike. This allows for a relatively simple task. First, you must remove the screws on the handles. These are usually pozidrive screws. After the screws have been removed then you’ll be able to remove the handle.
It’s a good idea to keep track of how much the spindle extends from the base of your handle when you separate it. This will allow you to measure the length of the spindle for a replacement handle. Simply measure the amount that the square peg extends from the bottom of the handle.
This is particularly important for inline uPVC window handles as they will always be straight and can only open from left or right, and won’t operate in the middle. It’s a good idea in the event that you’re not certain of the type of handle you have at your home, to borrow a handle and see how it functions.
You can also determine the hands of a uPVC window by observing how the handle rotates when it is in use. Handles that are hand-operated will turn clockwise or anti-clockwise. If you are unsure then ask someone to open the window with the handle to see how it works.
Take a measurement of the spindle
The selection of the right replacement handle for your windows can be a challenge as there aren’t all handles that are the same size. The spindle is the mechanism that locks the window and it is important that when fitting a new handle that you measure the spindle length accurately to ensure that it will fit. There are several different types of uPVC window handles, and they work in different ways, therefore it is crucial that you know what type of handle you have as well as the type of locking system that you are using.
Espag handles have a spindle that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, this will turn the lock inside the gearbox and opens the window. They are used on uPVC windows with casement and can be locked using keys for extra security.
Cockspur handles are usually found in older double-glazed uPVC window frames. They have a “nose”, which closes over a wedge-shaped striker block. They are also relatively easy to install and can be locked with keys. These handles are a little more difficult to find replacements for because they aren’t as well-known as the espagnolette handle.
If you have a tilt and turn upvc window handle replacement window, then you’ll require a particular kind of uPVC replacement handle with an additional locking mechanism. It can tilt the window open but also turn it inwards and outwards to fully open it. You must choose an opening handle that has a spindle that is at least 55mm in order to be able to reach the window frame.
The same procedure can be used to remove and replace the uPVC handle. However, you will need to take care when removing it. It might be necessary to open the window a bit wider than usual to access both screws that secure it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the right position and tighten the screws and then test the lock to ensure it works properly.
Fit the new handle
When you have the proper handle replacement, it will simply screw in the right place. It will require a screwdriver and an electric one could be a lot easier. It is important to not overtighten the screws before screwing them in. This can cause the handle or knob to become warped.
Inserting the spindle is the next crucial step to install the new handle. The spindle is a part that runs through the handle and operates the locking mechanism in the window. It is vital that it is fitted correctly, as it will ensure that the window is able to be opened and closed securely.
There are a myriad of different kinds of uPVC handles. There are various kinds of uPVC window handles.
Espagnolette Handles – These are inline handles that can be used to tilt and turn windows to open the window.
Cranked Espagnolette Handles – these are similar to the inline handle but feature a curved design that can be useful for windows in hard-to-reach locations.
Tilt and Turn Handles these are used on tilt and turn windows to control the closing and opening mechanisms.
The majority of uPVC window frames are equipped with these. They are commonly called ‘Bay Windows’ in the UK.
It can be very frustrating when your uPVC handle fails. But, there isn’t a need to replace the entire uPVC window just because of a damaged handle. There are several easy ways to fix and replace a broken uPVC window handle.
By identifying the kind of window you have, measuring the spindle length and purchasing an appropriate handle, you can fix your broken window handle. It is crucial to take your time and prioritise safety when working with windows and tools, but this is a straightforward task. It could make the difference between a secure and safe home or a vulnerable easily opened window! Bridgewater Glass is the place to go if you’re in need of help or need to speak with an expert regarding replacing your window handle. We have a group of experienced and knowledgeable professionals who are able to assist with any issues you might be experiencing.