How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don’t be concerned. Replacing a upvc window handle is a fairly simple job and can be completed in just a few steps.

It doesn’t matter if you have an in-line or a crank espagnolette window handle, they all have an elongated spindle that extends out of the back plate. The spindle is slotted into the locking device.

Determine the type of lock and handle

Over time, window handles or locks may get damaged and lose functionality. The good thing is that this can usually be remedied without replacing the entire window unit made of uPVC. One of the first things to do is to determine the kind of handle and lock you have, as this will determine what replacement parts you will need.

Identifying the kind of handle can be done by looking at the handle’s base. There will be a screw or pin holding the handle to its base. If the screw is not present it could be an indication that the handle has split off from its base. If the handle has split internally and does not hold the spindle any longer, it may also be an indication that the handle should be replaced.

There are many uPVC handles however the Espag handle is the most well-known. They are usually secured by two bolts and feature an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are usually used on tilt and turn uPVC windows.

Cockspur handles are a different kind of uPVC handle. They’re similar to Espag handles, but they have lower projections from the frame. These handles are typically used on older uPVC windows.

Venetian window handles are a different option. They are similar to Espag handles but have a flat bottom that allows them to be installed flush with the frame. These are a great choice for homeowners who want a stylish, elegant handle that will blend in with their uPVC window frames. These handles come in a range of colors that can match any style.

Find the spindle’s measurement.

It is crucial to be aware of how the handle is installed before you can order an replacement. This will determine how it is tight or replace upvc window Handle loose and whether it will fit properly into the window frame. This can be accomplished by identifying the handle type and determining the spindle’s measurement. The spindle is a metal shaft that connects the handle to the lock within the window frame. It’s available in different sizes and the current industry standard being 8mm. Older handles could have a cross-section of 9mm, therefore it’s essential to measure the old one to ensure you get the right size replacement.

There are several types of window handles, but the most common are inline Espagnolette and the cockspur handle. These handles operate a locking system in the window. They employ shootbolt rods to secure the window after it has been closed. Depending on the type of handle they are secured in place using pins or screws.

You can purchase replacement handles for upvc windows upvc handles on the internet or in many DIY stores. They come in a range of finishes and are suitable for new and replacement windows. They can also be key-locking or fire-escape non-locking for additional security.

To remove the old handle simply open the window towards the door and then remove all screws that hold it in place. Keep the screws in a container to prevent damage. After the screws have been removed, carefully remove the handle and take a measurement from the base to the tip of the spindle. This will provide you with the information needed to buy the correct replacement. The spindle of the handle is the metal shaft that connects it to the lock gearbox inside the window frame.

Remove the old handle

Changing the handle of an uPVC handle is a simple task that takes less than five minutes if you’ve got the proper tools. The first step is to determine the kind of lock and handle that will help you identify the right replacement. After that, measuring the spindle will help ensure that the new handle is a suitable fit. The old handle will need to be removed and replaced with the new one.

The majority of uPVC handles are inline Espagnolette handles, which are equipped with an integral spindle that slots into the window’s locking mechanism. They are generally easily removed, but could require force if they get stuck. The handle is typically held in place by two screws which can be removed with the help of a screwdriver. Depending on the type of handle, you might be required to take out any pins that are holding it in place.

After removing the screws you can remove the handle you were using previously. The top of the base plate will be visible when the handle is in the open position, showing two screws you can unscrew. If the sticker is on, you will need to take it off.

You can now screw in the new handle using the screws from the previous handle. Make sure that the screw holes are aligned on the window to the holes in the handle. After you have done this then replace the screw caps. Test the new handle. Changes to a window made of uPVC can be a simple and quick job, but it’s important to take the time to do it correctly.

Install the new handle

If you’ve been able to successfully remove the existing handle from the frame, it’s time to fit your new one. Start by locating and removing the screw covers with your screwdriver. Once the screw covers are removed, store them in a safe place before moving on to the next step.

Then, insert the new spindle into the handle by lining it up with the hole in the handle and screwing it into. Align the holes in the handle with the holes in the window seal replacement frame. Use a screw that is the same size as the previous.

uPVC Espag handles are equipped with a 7mm square spindle that rotates the lock mechanism fitted to the window. This style of handle is commonly found in modern uPVC windows. uPVC Cockspur handles (also called Cotswold handles) feature a long nose that locks over the frame’s outer or transom bar cross member and are often found in older windows made of uPVC.

Once the new handle has been put installed, it is important to test that it works properly by locking and unlocking the window a few times. If everything goes according the plan, the new uPVC handle should be securely fixed and operating smoothly. If not, the steps above will help you identify any problems and get it fixed quickly. If you’re struggling with your uPVC handle or have any other problems with your glazed home improvement don’t hesitate to call us at Bridgewater Glass for professional assistance. Our glaziers are able to repair or replace various window handles and frames. This makes us an ideal choice for double glazing.

Test the new handle

Over time, the handles of uPVC can be damaged and worn out. They can become less secure and less effective which is why it’s important to replace Upvc window handle them right away. It’s also a good idea to do when you are upgrading your windows. Switching your handle and locking mechanism will help maintain the integrity of your new windows.

There are a variety of styles of uPVC window handles. Some are fixed with pins or screws, whereas others have blades that slot into the lock mechanism. Each type has its own method of replacement, and it’s crucial to know what kind you have before working on it.

Espag window handles are the most popular type, and they’re typically found on the latest uPVC windows. These handles come with spindles that extend from the handle to the gearbox for locking and, when you open the windows, it triggers the locking mechanism. They are also easy to take off. However, you should be careful not to damage either the mechanism or the handle.

Cockspur window handles are another popular option for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the striker plates in the shape of wedges on the frame. This kind of handle can be more difficult to repair than other types, but it’s an excellent choice for the majority of homes.

Venetian handles are connected by two bolts, and they have a low projection on the frame. This is different from the Espag handle. These handles are perfect if your goal is to have a flush handle which blends into uPVC window frames. These are a great option for residential and commercial properties.