ghost immobiliser cost Immobiliser Installation
Protect your pride & joy from thieves by adding a ghost immobiliser. Our TASSA-certified system is safe from hacking, key cloning, and vehicle immobiliser bypass.
The system is hidden inside the wiring loom of your vehicle and is inaccessible to anyone who is looking. It works by creating a pin code push sequence by using existing buttons on the steering wheel doors, door cards and the center console.
No circuit cuts
It’s not a surprise that people are keen to secure the vehicle they have worked so hard to buy. However, traditional security systems such as alarms and wheel locks could easily be cut off or jumped by thieves. Ghost immobilisers on the other hand is a very effective solution that is silent and isn’t easily identified by modern thieves.
A ghost immobiliser is also known as a hidden device, is a device that communicates to the data network of your vehicle’s CAN to shut off the engine. It does this without the use of radio frequencies or key fobs. It communicates with the vehicle’s ECU via buttons already on the steering wheel, dash and door panels to create an unique pin code that only you can access. The code can be changed at any point and can be as long as 20 digits long, depending on your preference. It also includes a secure emergency code that you can utilize should you forget your PIN.
The ghost immobiliser can also be used to stop a relay box from transferring the signal of your car’s key from within your home, which would unlock the doors and then start the vehicle. It could also block the latest high-tech methods of stealing your vehicle, such as OBD port hacking. The device is tiny and weatherproof, meaning it’s difficult to detect and is even more difficult to interfere with.
The ghost immobiliser has another benefit: it can be inserted into your vehicle without leaving permanent marks. It’s ideal for those who plan to sell their vehicle in the near future. It’s also a lot more efficient and less time-consuming to install than an original factory-fitted system.
The Autowatch Ghost is a groundbreaking next-generation device that blocks theft of cars using contactless technology by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN code. It is a devious system that can be put in place without cutting any wires and requires no additional key fobs. It is also connected to the original ECU of the vehicle, which prevents thieves from by stealing it using a new key. This system has been verified by TASSA and can be linked with an International Security Register. Owners can rest assured, knowing that their vehicle is protected from theft.
No scanning by RF
You’ll want to secure your vehicle from theft if you have spent an enormous amount of money and effort to customize it. One method to do this is to install an immobiliser. This will prevent your engine from starting unless you enter a unique pin code. You can create a 20-digit PIN using the buttons on your dashboard and steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service or valet mode, which allows you to start your car temporarily without entering the PIN. This will permit the technician to work on your vehicle without you being present. This feature is ideal for autowatch Ghost immobiliser fitting those who wish to reduce time and make their lives easier.
A ghost immobiliser is a next generation device that connects to the vehicle’s CAN data network and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to blend in with the rest of your vehicle, since it doesn’t emit any noise or LED indicators. It can be placed anywhere on your vehicle without altering the look of the vehicle.
This stealthy gadget is approved by TASSA and could lower your insurance costs. It also has the ability to track, which can locate your vehicle even if it has been stolen. This is helpful if you have a costly or rare vehicle that you’ve invested lots of time making it your own.
Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle when you’ve lost your PIN number or are not able to enter your vehicle. This feature is ideal for those who need to pick up the kids or run errands, but don’t want to risk having someone else drive your vehicle. It is also helpful in the event that you need to bring your vehicle in for servicing or repair.
The Ghost has the advantage that it doesn’t transmit or detect radio frequency which means it’s not detected by thieves who use RF scanning and code grabbing technologies. It can also protect your car from key cloning, ECU swapping and other usual methods of car theft.
No key to cloning
Ghost immobilisers are an excellent way to safeguard top-end vehicles and stop key cloning. They prevent your car from starting unless an additional PIN code is entered along with the normal key fob. This makes it very difficult for thieves to steal your vehicle, and may discourage them from attempting it initially. This is a good idea in the event that your vehicle has been extensively customized or if it’s rare.
These immobilisers connect to the vehicle’s onboard CAN data network and are completely hidden, meaning that there is no visible indication of its presence inside the vehicle. It is also impossible for a thief to detect the device by using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend more time to take your vehicle.
To get around the system, thieves must know the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as often as needed. The pin code is simple to remember, but mathematically impossible for anyone else to figure out. The engineer will also have provided an emergency pin code in case you forget your pin.
The Ghost CAN Bus immobiliser could be easily mounted anywhere on your vehicle. It works with all vehicles and is completely customizable to match the appearance of your vehicle. It is also simple to use and cost-effective. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.
The CAN bus can be used with other security features. For example, it can detect the damage to your vehicle and notify the owner. It can also shut off the engine if it senses that the car is being manipulated. The system will protect your vehicle from hacking and key duplicate. It also detects vibrations and contact with the vehicle. It will also notify the owner if the vehicle is moving.
No OBD port hacking
Ghost is an immobiliser that is hidden and connected to your vehicle’s CAN data network that prevents thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob, and then code new keys. This technology is a step up over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or replacing your battery.
The autowatch ghost immobiliser fitting; Silver-vinter-3.Blogbright.net, Ghost is the world’s first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against hacking, key-cloning and replica car theft. It is not equipped with LED indicators or key fobs, instead using the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN sequence (up to 20 button presses) that must be entered before you can drive your vehicle away.
Modern thieves employ diagnostics to find circuit breakages in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn’t require any additional wiring. It is not identified by diagnostic tools that are professional. It can be installed even on vehicles with anti-theft devices.
Another advantage of a Ghost immobiliser is that your vehicle can only be started by a person who knows the PIN code and has physical access to your vehicle. This is a major advantage over security systems that can be tampered with using simple cable alteration, a screwdriver or the utilisation of a universal remote controller.
You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on a computer or mobile phone. This is useful in the event that you have to start your car when it’s left in a garage or at a valet parking service.
The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorized installers. It comes with the QR fingerprint system to allow components to be identified, which allows the return of stolen components should they be discovered. It can also be turned into a’service mode’ that will allow the engine to start when your vehicle is in a garage, or using valet parking services however, you will need to enter your PIN code to exit the vehicle again.