Ghost Immobiliser Installation

Add a ghost immobiliser to your car and protect it from thieves. Our TASSA certified system guards vehicles against hacking, key cloning, and immobiliser bypassing.

The system is hidden within the wiring loom in your vehicle It is inaccessible to anyone who is looking. It operates by creating the pin code push sequence that is pushed through buttons already present on the steering wheel doors, door cards, and the center console.

No circuit cuts

A car is a prized asset that you put in many years of effort to get, which is why owners want to protect their vehicle from theft. However, traditional security systems such as alarms and wheel locks could easily be snatched away or jumped by thieves. A ghost immobiliser on the other hand is a highly efficient solution that is silent and cannot be identified by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the dash, steering wheel and door panels. This generates an unique pincode only known by you. The code can be changed at any point and can be as long as 20 digits in length, based on what you prefer. It also comes with a secure emergency code that you can utilize should you forget your PIN.

The ghost immobiliser can also be used to stop a relay box from transferring the signal of your car’s key from inside your home, which will unlock the doors and then start the vehicle. It also blocks advanced methods of stealing your vehicle, including OBD port hacking. The device is small and weatherproof, which means it’s hard to spot and is also difficult to alter with.

Another advantage of the ghost immobiliser is that it can be put inside your car without permanent marks. This makes it ideal for those who are planning to sell their vehicle in the near future. It’s also a lot quicker and simpler to install than the factory-installed system.

The autowatch ghost immobiliser fitting Ghost is a revolutionary next-generation device that can stop vehicles that are stolen through contactless by connecting to the vehicle’s CAN data network and using the existing buttons to create a unique PIN code. This is a stealthy device that is installed with no wires cut and doesn’t require any additional key fobs. It is also connected to the vehicle’s original ECU and prevents thieves from gaining access to it using new keys or replacing the ECU with the use of a “relay”. This system is TASSA certified and is linked to an International Security Register, allowing owners peace of mind knowing that their vehicles are protected against theft.

No RF scanning

You will want to protect your vehicle from theft if have spent an enormous amount of money and spent a lot of time customizing it. One of the best ways to do this is by installing an immobiliser. This will stop your engine from running until you enter a unique pin code. Using the buttons on your steering wheel and dashboard, you can generate an up to 20 digits in length that is only known to you, ensuring that only you can drive your vehicle. You can also set up a valet or service mode that allows you temporarily to start your car without having to enter the PIN code. This will allow technicians to work on your vehicle without being present. This is a great option for people who want to cut down on time and make their lives easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard and steering wheel to program a PIN code. It is designed to be stealthy, with no indicators or sounds to make it obvious, and can be fitted anywhere on the vehicle without impacting the look of your prized possession.

This stealthy device is TASSA approved and could reduce your insurance costs. It also comes with an ability to track your vehicle, which can locate your vehicle even if it has been stolen. This is particularly useful if have a rare or expensive vehicle that you’ve spent lots of time customizing.

The Autowatch Ghost can be used in conjunction with an iPhone app to enable you to start your vehicle remotely if you forgot your PIN or unable to get into the vehicle due to some reason. This feature is great if you have to run errands or pick up your children, but do not want to risk having someone else drive your vehicle. This feature is helpful when you need to take your car in for repair or service.

Another advantage of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves using RF scanning or code grabbing technology. It can also safeguard your car from key cloning, ECU swapping and other usual methods of car theft.

There is no key to cloning

Ghost immobilisers are an excellent method to protect high-end cars and prevent key cloning. They work by preventing your car from starting unless an additional PIN code is entered along with the regular key fob. This makes it very difficult for thieves to take your vehicle and can also stop them from trying it in the first place. This is an especially good option if you’ve invested a lot of time and money customizing your vehicle, or own a rare or expensive model.

The immobilisers are connected to the vehicle’s onboard CAN network and are completely hidden meaning there is no visible indication of its presence within the vehicle. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar would need to wait longer to take your vehicle.

A thief will need to be aware of the unique pin sequence and the exact location of the ghost in order to bypass it. The pin code is exclusive to you and you can change it as often as needed. The pin code you choose is easy to remember, but mathematically impossible for anyone else to figure out. The engineer will also provide an emergency PIN code in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It works with all vehicles and is completely customizable to match the appearance of your vehicle. It is also very cost-effective and simple to use. You can even transfer the device to a different vehicle if you switch vehicles during the course of ownership, as long as the new vehicle is compatible with it.

The CAN bus is compatible with other security features. For instance, it can detect damage to your vehicle and alert the owner. It can also stop the engine if the car is tampered with. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations or contact with the vehicle. In addition, it could warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost is an immobiliser hidden in the module that is connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is an improvement over the methods that were used by thieves to steal vehicles in the past. The CAN data network also means that your system will not be affected when you disconnect or change your battery.

The Autowatch Ghost is the world’s first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking and copy-cat car ghost immobiliser theft. It doesn’t use LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to detect circuit breaks in your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn’t require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

A ghost immobiliser cost immobiliser comes with a major advantage: your vehicle will only be started by someone who knows your PIN code and physically has access to your vehicle. This is a major benefit over traditional security systems that can be bypassed with simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

If you forget your PIN, you can reset it easily with the emergency PIN override function on a mobile phone or computer. This is helpful if you are looking to start your vehicle after having left it in a garage, Autowatch ghost Immobiliser fitting or using the valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorized installers. It comes with a QR fingerprint system to identify specific parts that allows for the return of stolen items in the event that they are found. It can also be turned into a service mode’ which permits the engine to start when your car is parked in a garage or with valet parking, but you will need to enter your PIN code again to exit the car.