Ghost Immobiliser Installation

Add a ghost immobiliser to your car to safeguard it from car thieves. Our TASSA-verified system protects against hacking, key cloning and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle making it totally invisible to anyone who is looking. It works by generating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a precious item that takes hours of work to acquire, so it’s understandable why owners want to protect their car from theft. Traditional security systems, such as wheel locks or alarms, can be easily bypassed by thieves. Ghost immobilisers are a very effective and efficient solution that operates in silence and isn’t easily identified by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This creates an individual pincode that is only available to you. The code can be changed at any time and can include up to 20 digits based on your preferences. It also comes with a safe emergency code that you can utilize in case you forget your PIN.

The ghost immobiliser is also beneficial to stop a relay box in your home from transferring the signal of your car key, which would open the doors and start your vehicle. It can also block sophisticated methods to steal your vehicle, like OBD port hacking. The device is small and weatherproof, so it’s difficult to see and even harder to tamper with.

Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. It’s ideal for those who are planning to sell their car in the near future. It’s also faster and easier to install than a factory-fitted unit.

The Autowatch Ghost, a revolutionary new generation device, stops thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a hidden device that can be set up without severing any wires and does not require any additional key fobs. It can also be connected to the vehicle’s original ECU to prevent thieves from gaining access by using a new key or replacing the ECU with a “relay”. This system is TASSA verified and can be connected to an International Security Register, allowing owners confidence that their vehicles are safe from theft.

No scanning by RF

You’ll want to secure your vehicle from theft if have spent lots of money and time customizing it. One method to do this is by installing an immobiliser. This will stop the engine from starting until you enter a unique pin code. You can create a 20-digit pin using the buttons on your dashboard and the steering wheel. This will ensure that only you are able to drive your car. It is also possible to set up a service or valet mode, which allows you to start your car for a short period without having to enter the PIN code. This will allow your technician to work on your vehicle without your presence. This feature is great for those who wish to cut down on time and make their lives easier.

A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle and utilizes buttons on the dashboard as well as the steering wheel to create a PIN code. It is designed to blend into with the rest of your vehicle, since it doesn’t emit any noise or light indicator. It can be put in anywhere on your vehicle without altering the look of the vehicle.

This stealthy system has been approved by TASSA and can reduce your insurance costs. It also comes with a tracking function, which can locate your vehicle even if it’s been stolen. This is particularly useful if own a unique or expensive vehicle that you’ve spent a lot of time in making it your own.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle if you have forgotten your PIN or are unable to access your vehicle. This feature is perfect for when you have to take your kids to school or run errands but don’t want to risk having someone else drive your vehicle. It can also be helpful if you need to take your vehicle to a mechanic for maintenance or repair.

Another advantage of the Ghost is that it doesn’t transmit or detect radio frequency signals, which makes it unnoticeable to thieves using RF scanning or code grabbing technology. It also has the ability to safeguard your car from key copying and ECU swapping which are the most the most common methods used to steal cars.

There is no key to cloning

ghost immobilisers; a knockout post, are an excellent way to safeguard top-end vehicles and stop key cloning. They stop your car from starting until an additional PIN code is entered alongside the standard key fob. This makes it very difficult for thieves to steal the vehicle, and can discourage them from trying. This is a particularly good idea if you have invested a lot of time and money making your vehicle unique or have a unique or expensive model.

These immobilisers are connected to the vehicle’s CAN data network and are completely hidden, Ghost immobilisers which means their presence isn’t visible. It is also impossible for a thief to identify the device using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend much longer in order to steal your car.

A criminal will need to be aware of the pin code and the exact location of the ghost to bypass it. The pin code is exclusive to you and you can change it as often as you want. The pin code you choose is easy to remember, but mathematically difficult for anyone else to figure out. In addition the engineer will provide you with an emergency pin code override in case you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It is compatible with any vehicle and can be fully customizable to match your car’s appearance. It is also easy to use and cost of ghost immobiliser-effective. The device can be moved to a different vehicle, if it is compatible with the new vehicle.

The immobiliser for the CAN bus is compatible with a number of other security features. For instance, it could detect the damage to your vehicle and warn the owner. It will also shut off the engine in the event that the vehicle is being manipulated. It also helps protect your vehicle from hacking and key cloning. It can also detect vibrations and contact with the vehicle. It can also alert the owner if the vehicle is moving.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This stops thieves from hacking in to disable your alarm, deactivate your key fob, and create new keys. This technology is a significant improvement over the old methods used by thieves to steal vehicles in the past. The CAN data networks means that your system will not be affected when you disconnect or change your battery.

The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking and theft of replica cars. It does not use LED indicators or key fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves use diagnostics to detect circuit cuts on your vehicle. They can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn’t need any additional wiring and isn’t identified by diagnostic tools that are professional. It can be installed even on vehicles with anti-theft devices.

A Ghost immobiliser comes with a major benefit: your vehicle can only be started by someone who knows your PIN and has physical access to your vehicle. This is a significant advantage over security systems that can be bypassed by simple cable tampering or a screwdriver.

If you forget your PIN you can reset it easily by using the emergency PIN override function on a mobile device or computer. This is useful if need to start your car after it has been left in a garage, or by using the valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and can be installed by our authorised installers. It has an RFID fingerprint system that allows individual components to be identified, which allows the return of stolen parts in the event of their being discovered. It can also be switched into ‘service mode’, which will allow the engine to start when the vehicle is in a garage, or using valet parking services, but you will need to enter your PIN code to leave the vehicle.