Ghost Immobiliser Installation

Add a ghost 2 immobiliser fitting near me immobiliser to your car to safeguard it from car thieves. Our TASSA-certified system guards against key cloning, hacking, and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle and is invisible to anyone who looks. It operates by generating pin code push sequences by using existing buttons on steering wheel, door cards, and centre console.

No circuit cuts

It’s not a surprise that people are keen to secure the vehicle they’ve worked so hard to buy. However, traditional security systems such as wheel locks and alarms can easily be snatched away or taken over by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and can’t be recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only available to you. The code can be altered at any time and can be as long as 20 digits long, depending on the style you prefer. It comes with an emergency code that you can use in case you forget your PIN.

The ghost immobiliser can also be beneficial to stop the relay box inside your home from transmitting the signal from your car key, which could open the doors and start your vehicle. It can also block high-tech methods to steal your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to detect. It’s also very difficult to alter.

The ghost immobiliser comes with a further advantage: it is able to be inserted into your vehicle without leaving permanent marks. This makes it ideal for those who are planning to sell their car in the future. It’s also faster and easier to install than a factory-fitted unit.

The Autowatch Ghost, a groundbreaking new-generation device, prevents thefts from cars that are not connected to the CAN network of a vehicle and using the buttons to generate a unique PIN code. This is a stealthy system that can be installed without severing any wires and requires no additional key fobs. It can also be connected to the original ECU of the vehicle, preventing thieves by stealing it using a new key. This system is TASSA certified and is linked to an International Security Register, allowing owners confidence that their vehicles are protected against theft.

No scanning by RF

If you’ve put a lot of time and money into the customisation of your vehicle, you will need to secure it from theft. One method to accomplish this is to install an immobiliser, which will stop your engine from starting unless you enter a unique pin code. You can create a 20-digit pin by pressing the buttons on your dashboard and the steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet or service mode that will allow you temporarily to start your car without entering the PIN code. This allows your technician to work on your vehicle without you being present. This feature is great for those who want to save time and make their lives easier.

Ghost immobilisers, which are new generation device, connects to the CAN data network of your vehicle and uses the buttons on the dashboard as well as the steering wheel to program a PIN code. It is designed to be discrete and has no light or sound to make it obvious, and can be fitted anywhere on the vehicle without disturbing the aesthetics of your pride and joy.

This stealthy gadget has been approved by TASSA and can lower your insurance costs. It has a tracking function that can locate your vehicle, even if it’s been stolen. This is useful if you have a rare or expensive vehicle that you’ve invested lots of time customizing.

Autowatch Ghost, in conjunction with the iPhone app allows you to remotely start your car if you have forgotten your PIN or are unable get into your vehicle. This feature is perfect when you need to run errands or drop off your kids but don’t want to risk having someone else drive your vehicle. This feature is helpful in the event that you need to bring your vehicle in for repair or service.

The Ghost is unique in that it doesn’t transmit or detect radio frequencies, so it is undetectable by thieves who employ RF scanning and Ghost immobilisers code grabbing technologies. It can also protect your car against key cloning and ECU swapping which are the most the most common methods used to steal cars.

No key to cloning

Ghost immobilisers can be an excellent way to safeguard expensive cars and stop key cloning. They prevent your car from starting unless an additional PIN code is entered in conjunction with the normal key fob. This makes it difficult for thieves to rob your vehicle, and may stop them from trying it initially. This is an especially good idea if you’ve spent a lot of time and money making your vehicle unique or have a unique or expensive model.

These immobilisers are connected to the vehicle’s onboard CAN network and are completely hidden meaning that there is no visible indication of its presence in the vehicle. It is also impossible for a thief to locate the device using radio frequency scanning or code technology for grabbing. This means that a thief will have to spend more time to take your vehicle.

To get around the system, thieves must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as often as you need to. The pin you select is simple to remember, however, it is mathematically impossible for anyone else to understand. Additionally, the engineer will have provided you with a backup PIN code override in case you ever forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any location of your vehicle. It is compatible with all vehicles and completely customizable to match the look of your vehicle. It is also simple to use and affordable. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.

The CAN bus immobiliser is also compatible with many other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It can also stop the engine if the vehicle is damaged. The system can protect your vehicle from hacking as well as key duplicate. It can also detect any vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from trying to hack into your vehicle to disable your alarm, turn off your key fob, or make new keys. This technology is a significant improvement over the methods that have been employed by thieves in the past to steal your vehicle. The CAN data network also means that the system will not be affected by disconnecting or changing your battery.

The Autowatch Ghost is the world’s first aftermarket CAN bus non-detectable immobiliser that safeguards against key-cloning, hacking, and copy-cat car theft. It does not use LED indicators or key fobs, instead using the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered prior to when you can drive your vehicle away.

Modern thieves employ diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require a lot of wiring or are built into the wiring. The Ghost is weatherproof, doesn’t need any additional wiring and cannot be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by a person who knows the PIN code and has physical access to your car. This is a big advantage over traditional security systems that are able to be bypassed using cable tampering, a screwdriver or the use of a universal remote controller.

If you forget your PIN you can reset it easily by using the emergency PIN override function on a mobile phone or computer. This is useful if you want to start your vehicle after it has been left in a garage, or using the help of a valet parking service.

The Autowatch Ghost 2 is the latest generation of the product and is insurance approved by TASSA when installed by one of our authorised installers. It has an RFID fingerprint system that allows parts to be identified which allows the return of stolen parts should they be discovered, and can also be turned into a’service mode’ that will allow the engine to start when your vehicle is in a garage, or using valet parking however, you have to enter your PIN code to leave the vehicle.