Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you’re doing all you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and UPVC Window Repairs eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any shards will fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It’s a great idea to tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional arrives to fix the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the door and the window is substantial, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, over time they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts and even security. It’s crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you’ll need to open the window to access the frame. Then, using the screwdriver, you’ll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you’re satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you can’t reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It’s relatively simple to fix a loose uPVC handle. First, you’ll need close your window and do a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it doesn’t then you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it’s important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may require removal before a new layer is applied. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to ‘over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window doctor. In more extreme cases, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal than the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be hinges at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It’s very simple to change a window hinge however it is simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to offer suggestions.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using the lubricant that doesn’t contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges may also become misaligned due to wear, creating gaps where the sash and frame meet. They can be repaired by giving them thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, it’s possible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it may be cheaper to replace them than to repair them. So, if you’re having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.