Double Glazing Locks Repair

If a double-glazed window does not close, it causes drafts that allow heat to escape. This also weakens the security of your home and puts you at a greater risk of being a victim of burglary.

Over time, double glazed window hinges, handles and seals can become damaged. If this is the situation it can impact your windows’ functionality and void any warranties you might have.

Locks with a problem

While many take great care when installing anti-burglar security systems for their gates and main doors, it is often overlooked that the windows are prime targets for burglars. Poorly secured locks can cause drafts, let heat escape, and reduce the security of your house.

If your uPVC windows locks don’t work, it is likely that the lock mechanism is blocked. This is typically caused by a split in a gearbox component. This can cause the handle not to open, but instead to rotate 360 degrees. This is a problem that is common to uPVC windows, but it can also happen in tilt-and-turn windows as well as sliding sash windows.

If this happens you can release the lock by applying pressure on the lever handle. This can help to unblock the gear box and restore the window’s opening. If this method does not work, you may have to replace the window lock mechanism completely.

Most modern uPVC windows use espagnolette locks. These are internal locking systems which secure the window by using locks that look like mushrooms and are that are inserted into the frame keep. The handle controls the gearbox that then triggers the cams to either move upwards or downwards. A common issue is when the spindle on the lock has broken and the handle is unable to turn freely but not to move the window open or close.

A malfunctioning transmission may cause your window to appear locked but it’s not. This can occur when the centre rods, also known as crocodile teeth fixings within the gearbox break off. Misty Glaze will supply and install replacement rods if this happens.

It is important to not force a broken or stuck lock. This can cause a lock to snap or break particularly if you have windows made of uPVC which expands and contracts as temperatures change. It is best to contact an expert locksmith who will diagnose the problem and repair it.

Sticky Doors/Window

It is annoying to have doors and windows that don’t close, but they may also indicate more serious structural problems. It is essential to seek professional help if you have trouble opening or closing a door or window. The problem could result from a variety of reasons like foundation settlement or a lack of support for the crawl space.

Frame or humidity issues can cause windows and doors to stick. If your frames are made of wood for instance, they can warp when exposed to humidity. This makes opening and closing them a challenge even if the hardware in good condition. When this happens, the wood swells and presses against the hinges, creating friction.

If your window or door gets stuck in the summer, try rubbing it with bar soap to reduce the friction. It will shrink and may temporarily solve the issue. This method will need to be repeated periodically during times of high humidity.

A more permanent solution involves sanding the window or door frame to create an even finish. This can be done by hand or with an electric tool. A professional can also sand down and stain or paint your window or door frame to make it look new again.

If the sanding and soap don’t help it’s likely that the issue is due to foundation settlement or a weak crawl space. Examine for cracks in your area. If you spot these indications, you need to contact an expert in foundation repair. Damage to the foundation can result in uneven floors, a misaligned wall and doors and windows that are stuck. It’s important to tackle these issues as early as possible to avoid more costly and risky repairs in the future. If ignored these issues can escalate to the point where your entire home’s structure is unstable. Call the Southeast’s top foundation repair specialists to schedule an inspection today!

Cracking/Blowing Issues

Cracks can develop when double glazing repair glazing begins to degrade. This can be an unsightly appearance and allow all the heat in your home to escape. It can also be dangerous for your family, since the sharp pieces of glass could injure them if they are shattered. It is recommended to fix double glazing repair-glazing windows with a crack before they become worse. This can increase the cost of replacement.

Window doctor Near Me seals are vital to keep air between your window panes and also to stop drafts from entering your home. However, as time passes, these can become perished or shrink due to changes in weather conditions. If left unchecked this could lead to moisture in the home, condensation and draughts.

A professional can usually solve this issue. They will be able to replace the window seal and get your windows back to their original state. They may also suggest additional features that will reduce the likelihood of a stress crack forming in the future, like trickle vents for improved ventilation.

It is also possible to lubricate the handles and hinges of your windows and door. This will enable them to move more easily and allow the lock to function as it should. Rub some lubricating oil on a cloth that is free of lint and rub them into the hinges, handle mechanism and places where they pass through frames (for example for sash window). You can also remove the handles and clean them in warm soapy water to remove any dirt or dirt.

It is crucial to contact an expert if your uPVC windows and doors aren’t working as they should. They can identify the problem quickly, Window doctor near me and then repair it in a brief time. It’s much safer and cheaper than trying to fix the issue yourself and could cause damage to the mechanism. It will also give you peace of mind knowing that your home is safe and secure.