Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don’t get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. However If windows with double panes are held in place by internal beading, it’ll be more difficult to remove the old panes and put in new ones. In this instance you’ll need to find some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed, it’s a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, Upvc Repair preventing any intruders to gain access into your home. If the distance between the door and the window is large, you might prefer an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it’s crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. First, you’ll need to unblock the windows to get at the frame. After that, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or uPVC repair counter-clockwise. Close your window to check the fit after having relocated your hinges. If you’re happy with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it’s essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism wears out. It’s relatively simple to repair a loose uPVC handle. The first step is to close your window and do an initial test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn’t then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it’s crucial to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the problem the old caulking may require removal before a fresh layer can be applied. When it comes to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it’s more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It’s very simple to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or by inadequate installation at the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you advice.

It is also important to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc repairs windows can be caused by different factors. The hinges can also become misaligned due to wear, creating an opening where the sash and frame meet. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them aligned or replaced. Second, the interlock can be disaligned. This is located on the hinge’s side and could require to be cleaned. In certain instances it might be necessary to replace them.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

Your upvc windows can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and eventually, they will reach the point when it’s more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.