UPVC Window Repairs

uPVC windows are energy efficient and can help reduce heating costs. However, as they age problems can arise which need fixing. This can include faulty hinges, handles or locks.

DIY people can fix wooden windows with ease. It can also be cheaper than a new replacement window.

Cracks

Cracks and tears in windows made of uPVC can be a serious problem. Unrepaired windows can cause water intrusion, less effective barriers to cold weather, or uPVC repair even structural damage. It is crucial to find an expert local repair or builder who specializes in fixing uPVC frames and can demonstrate the skills, experience and tools needed to produce the most effective results. This will ensure that your shattered window is repaired before it gets any worse and that you don’t need to replace your window glass or unit.

There are numerous home solutions that can be utilized to repair small cracks in the glass. Superglue and masking tape are two of the most common solutions to hold glass damaged in position for a short time. For cracks that are more extensive, the tape may need to extend beyond the crack on both sides to get the optimal results.

Additionally, two-part epoxy can be used to fix broken or cracked glass. This is available from most hardware stores and can be purchased for about $10. Make sure your workspace is prepared prior to mixing the epoxy. Also, ensure that you have all the equipment necessary to complete the task.

If you find that your lower or upper sash has difficulty raising it could be because the cords attached to the sashweights have been damaged. Fortunately, this is an easy fix that can be done using the ladder and a flathead screwdriver. A rotted dripcap can also be easily repaired at home. The majority of home centers have a rot-free drip cap that can be easily nailed or caulked to be fixed. If you have a double or triple-pane window, be sure to make sure that one of the panes are not broken. This is because the gasses that fill the space between the panes are responsible for enhancing energy efficiency and should be kept, not escaping.

Water Leaks

If your uPVC window is leaking, it could cause damage to your interior and lead to costly repairs. Water leaks may also cause structural damage to your home, as well as mold growth. It is crucial to address any problems caused by leaking windows immediately to prevent the damage.

A damaged sealant around window frames is a frequent reason for leaks. The use of silicone caulking can bring the condition of the seal back to normal and prevent water leakage. It is also essential to look for gaps and cracks around the frame, as well as in the brick or stone walls surrounding your windows.

A blocked drainage hole or faulty flashing are the other two common causes of leaking windows. It is important to ensure that the drainage holes are clean and unclogged, especially after a heavy rainstorm. Also, you should check the window’s flashing to ensure it is well-sealed.

Lastly, it’s important to make sure that your drip cap isn’t broken or rotten. A rotten or damaged drip cap could let water in the window from above and cause damage to the structure of your home. Replacing drip caps isn’t difficult and is usually a straightforward process of purchasing an entirely new one and putting it in the right spot.

It’s an excellent idea to have your windows tested for water-tightness by a professional. They can employ a specific instrument to test the water-tightness of your windows to ensure they meet the industry standards. If your windows fail the test, they will have to be replaced. This is a cost-effective repair however it’s worth it for the security and safety of your family.

Sagging

If your windows aren’t closing properly, it could cause various issues, including drafts, condensation and an increase in energy costs. It could also indicate that the windows weren’t properly installed or the sealant has worn out. Fortunately, there are a few ways to fix the problem.

To fix your window properly it is essential to create a space with plenty of natural light. Begin by placing newspaper or an old blanket on the floor to shield it from any splinters or drips that could be leaking from the window during your work.

You should also make use of a white cloth that has been submerged in a solution containing detergent and water. This will prevent any stains of color appearing on your windows. When you’re ready to begin working on your uPVC windows, begin by marking where the hinge channel should be located. Unscrew the channel, and then fill the screw holes in the frame with epoxy (for uPVC frames) or wood filler. Make sure you smooth the hole before it sets.

Reinstall the hinge channel after the holes are filled. Make sure that it is aligned with the window jamb. Also, make sure that you drill the new holes approximately a quarter inch from the original locations.

Then, measure the length of the spindle protruding from the underside of your handle and then order a replacement online or bring the old one to an hardware store to get a matching. Remove the setscrew from the shaft. Flatten it to allow the set screw to be locked onto the shaft. Then, your uPVC windows should shut smoothly.

Broken Hinges

If your upvc repair window hinges have broken or are not functioning correctly and you are unable to open or close the window, it will be difficult to open or close the window. This can be a security problem and can also stop your home from staying warm or cold. It’s easy to get a new window hinge for your uPVC windows. But, it’s crucial to ensure you have the right type of hinge for your windows.

This is because the hinges have to be of the same width to fit into the window frame. The most popular hinge for uPVC windows are standard 18mm or UPVC 15mm window hinges. There are also special hinges for wooden frames. Finding the right window hinge for your windows will aid in avoiding common problems that many homeowners have with their windows, like not closing properly.

There are several reasons why your window hinges could have become slack or stiff. One common cause is that the hinges are not tightened enough. To check, use a screwdriver and locate the friction screw on the end of the hinge. Loosen it. After that, you can adjust it by turning it either way until you get the desired result.

Call Preston Glass Fix if your UPVC window’s hinges aren’t functioning correctly. We can offer an immediate fix. Our technicians will inspect the condition of your hinges and give you advice on the most suitable solution. We can replace the window hinges, re-tension them, or install new locking mechanisms to ensure that your UPVC windows are safe and secure for the long haul.

Locks that aren’t working

UPVC window locks and mechanisms are an essential component of the security of your home, they make it very difficult to open the window without breaking in. When a lock fails it could be frustrating, however it is a quick and easy repair and you don’t need to replace the entire window.

It’s often an issue that could have been easily avoided with regular maintenance. This is why we suggest having your uPVC windows checked regularly by our annual maintenance program to reduce the chance of issues.

The majority of modern uPVC windows have espagnolette locks which operate by pushing the handle’s nose across a wedge block then turning the handle to close the lock. They are extremely efficient in keeping windows secure, but over time, they could begin to fail if they’re not properly maintained. We suggest using WD-40 for lubrication every couple of times a year.

If you notice your uPVC window isn’t opening or closing as quickly as it used to or when the lock isn’t working properly, there could be a problem with the locking gearboxes within the frame. This can be difficult to access as it requires the removal of the seals that surround the frame of the window and then removing the handle.

A locksmith that specializes in UPVC repair will be able to diagnose this fault quickly, and then replace the broken locking mechanism with a precise replacement. This is a quick and easy repair that can save you hundreds of dollars by cutting out the need to purchase new windows.