Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you’re planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the cloth rather than on the floor where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it’s best to seal the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the distance between the window and the door is substantial, you may prefer security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It’s crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you’ll need to open the windows to reach the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you’ve repositioned the hinges, shut your window and check for fit. If you’re satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could also be caused by the handle mechanism wears out. Fortunately, it’s easy to repair the handle of a window that is loose yourself. First, you’ll need close your window and do an experiment fit. The corners of the sash should be aligned with the casing joint. If it doesn’t then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk is applied. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be the hinges that are at fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It’s very simple to replace a hinge on a window, but it’s simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are happy to offer advice.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes a gap to form where the sash joins the frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, upvc window repairs this is located on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

The next most common reason for draughts is window seals. They are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc window repairs will continue to provide excellent security and insulation for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.