Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are simple to install and feel like high-quality. But it’s important to understand that the kind of handle you pick is the one that’s right for your window.

The primary factor is the step height, which is the distance from the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There are a wide range of replacement window handles made of upvc available to buy. They come in many different colours and styles so there is sure to be something to suit your existing windows. It’s easy to buy on impulse, particularly when the handle breaks so it’s a good idea to look over certain things prior uPVC Replacement Window Handles to committing to purchasing a new one. The first thing you should consider is what type of upvc handle you have now and what the difference between types is. The table below lists the most popular handles to help you choose the one that will match your window.

The majority of double-glazed windows today have handles for epag. They are typically attached to the frame with two screws that screw in from above and below.

They come with a spindle bar on the back that can be a variety of sizes, and this will determine how they work (either left or right handed). This is the reason it’s crucial to measure the current handle to ensure you’re ordering the correct replacement.

The arm is secured to the frame by two bolts, much like the Espag handle. However, the arm has a low projection so that it won’t poke your blinds. This is a great choice if you want the handle to blend with your blinds, and you have windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose that is closed over a wedge which sits on the frame of the window. This kind of handle can be commonly found on older upvc windows as well as some wooden windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pressing at the top of the window. This opens the window from the inside, allowing you to clean the outside without needing to step out onto a ladder or climb over the garden fence. These are also a great option for those who have limited mobility, and can increase security and accessibility in the home.

Tips and hints

A lot of people will need to replace their uPVC window handles at some point. It’s important to have some tips and tricks that will make the job easier.

Find out what kind of handle is at your home. Based on the type of handle it is attached to and which locking mechanism it utilizes it might be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are stuck or are getting stuck, you’ll need to replace them along with the handle.

Fortunately, the majority of uPVC handles conform to industry standards and are alike. This makes replacing them an simple process. First, remove the screws on the handles. They are typically pozidrive screws. Once they are removed, you are able to remove the handle.

It’s a great idea to note how much the spindle protrudes from the base of your handle when you remove it. This will allow you to measure the length of the spindle when you are looking for a replacement handle. Simply measure the amount that the square peg sticks from the bottom of the handle.

This is particularly crucial for inline uPVC window handles because they are always straight and can only open left or right, and won’t operate in the middle. If you’re unsure of the kind of handle you have in your home, it might be beneficial to get an existing handle from your neighbour’s house and see the way it works to get an idea.

You can also determine the handiness of a uPVC window by observing how the handle spins when it is in use. Handed handles will turn either clockwise or anti-clockwise. If you are unsure then ask someone to open the window using the handle and see what happens.

Measure the spindle

It can be difficult to choose the appropriate replacement handle for your window because there aren’t all handles that have the same dimensions. It is crucial to measure the spindle accurately when installing a new handle. This will ensure that the handle is suitable. There are several different types of uPVC window handles that work in different ways, therefore it is crucial to know the type of handle you have as well as the type of locking system you have.

Espag handles have a spindle that extends from the rear of the handle and upvc replacement window handles goes into the lock gearbox within the window frame. When you turn the handle this turns the lock inside the gearbox, and opens the window. They are typically used on uPVC windows with casement. They can be locked using keys for extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by an “nose”, which closes over a wedge-shaped striker block. They are also simple and can be locked with keys. It is more difficult to replace these handles as they are less common than the handles made of espagnolette.

If you own a tilt-and-turn uPVC, you will require a replacement handle with a different locking system. It can tilt the window open but also rotate it back and forth to open it fully. You must make sure that the handle you choose has a spindle length of at least 55mm or it will not be able to penetrate the frame of the window.

The same method can be used to remove and replace the uPVC handle. But, you’ll need to be cautious when unscrewing it. You may need to open the window a little larger than normal to ensure that you can access both screws that attach it to the frame. Once you have put in your new uPVC handle and verified that it is in the correct position, you are able to tighten the screw covers and test the lock to ensure it works correctly.

Replace the handle with the new one.

Once you have the correct handle replacement windows prices it can be screwed in place. It will require a screwdriver and an electric one could be a lot easier. When screwing, it is crucial not to over tighten the screws, as this can cause the handle to warp or crack.

Inserting the spindle is the second important step to attach the new handle. The spindle is the component that runs through the handle to operate the locking mechanism in the window. It is essential that it fits correctly as it will ensure that the window can be shut and opened securely.

There are a variety of different kinds of uPVC window handles. There are various kinds of uPVC window handles.

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design that is useful for difficult-to-reach windows.

Tilt and Turn Handles – They are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames come with these. In the UK they are usually referred to as “Bay Windows”.

If your uPVC window handle is broken, it can be extremely frustrating. There is no need to replace the entire uPVC windows because of a broken window handle. There are a few easy steps you can take to fix or replace a damaged uPVC handle.

You can repair your broken window handle swiftly by identifying the model and determining the spindle. When working with tools and windows it is crucial to prioritize safety. But this is a fairly easy task. It can be the difference between a safe and secure home, or an insecure, easily opened window! Bridgewater Glass is the place to go if you have questions or would like to speak to an expert about replacing your window handle. We have a team that is knowledgeable and experienced to help you with any issues.