Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum or timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you’ll need to locate some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed from the window, it’s best to cover the gap with packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap is large, you might be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It’s crucial to act when you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you’ll need to open the windows to access the frame. After that, using the screwdriver, you’ll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you’ve repositioned the hinges, shut your window and check for an appropriate fit. If you’re happy with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It’s fairly simple to fix a loose uPVC handle. The first step is to close the window and perform an experiment fit. The corner joints of the sash should align with the casing joint. If it isn’t, you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it’s crucial to take action. Windows that leak water do can not only cause degradation of your home’s structure but also hamper your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. When it is time to uPVC repair, you must be careful not to over-caulk. This can make your window doctor harder to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part hinges are prone to wear out over time. It is an easy process, but it’s easier to do when you have a person to assist in holding the frame in place.

Check that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc repairs near me can be caused by different things. The hinges can also become unbalanced due to wear, which can cause gaps between the frame and sash. This can be easily repaired by giving them good cleaning, but when they’re beyond repair, upvc repairs near me it could be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it may be possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes filled with some sort of filler and can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can remain a great source of insulation and upvc repairs Near me security for your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it could be more cost-effective to replace them rather than repair them. So, if you’re having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.