Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you are going attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled.

It’s a great idea tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the door and the window is large, you might prefer an alarm system that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. It’s important to take action when you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. First, you’ll need to open the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and test it for fitting. If you’re satisfied with the fit, you can tighten the screws until they remain in position.

If you can’t reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle wearing out. It’s fairly simple to fix a loose upvc window repairs hand. First, uPVC repair you’ll need to shut the window and do a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn’t then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you’re waking up to wet floors and damp walls every time it rains it’s important to take action. The leaks of water from windows do can not only cause degradation of your home’s structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. When it is time to uPVC repair, uPVC repair it is important to avoid over-caulking. This will only make your window harder to clean and decrease its energy efficiency.

Verify that the drainage holes have no debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is very easy to replace a hinge on a window replacement but it’s much easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by improper installation in the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become disaligned as a result of wear, creating an opening between the frame and sash. They can be fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it may be feasible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional as soon as you can.