window doctor Repairs
Window repairs can save homeowners money and help keep their homes warm. Window replacements may be required in the event of serious damage like broken glass or a broken window frame.
However, many other issues can be fixed to prolong the life of your windows. The most frequent issues are:
Cracked or broken panes
Glass that is cracked could be caused by a lawnmower that throws rocks at the wrong time or the blow of a tree branch by strong winds. It’s not just visually awful, window doctor but it could cause higher energy bills because the broken pieces let cold air into your house. It’s relatively easy to repair windows with damaged panes.
Start by carefully removing the glass using gloves and glasses. You may have to make use of a utility knife in order to remove any remaining putty or glazing compound around the edges of the frame. Next, use a soft cloth or paper towel to clean the surface of the glass and wood of the frame.
After cleaning the area, apply a silicone caulking that is water-proof to the frame’s perimeter. This helps prevent water from getting into the crack, which can cause further damage to both the frame and the glass.
A serious crack in double glazing repair-paned glass may compromise the gas between the panes, which can make your windows less efficient in insulating. If the crack is serious enough to threaten the quality of the glass or the glass has an inner pane completely missing, it might be the time to call an expert.
Thermal stress cracks may also occur when there’s an extreme temperature difference between your home and the outside. This causes the glass to expand and contract. If the cracks are on two sides of a window, it is recommended to replace it rather than try to repair it.
If your windows are cracked and not yet ready to be replaced clear tape can do a decent job of preventing the crack from spreading and preventing bugs from entering cold air. You can even cut an area of nylon stocking or tarp that’s sufficient to cover the crack, and stick it to the wall using duct tape. This isn’t a long-term solution, but it works well in a pinch and keeps cold air and insects from entering your home. If you notice cracks or blemishes on your windows that are older You should consult your local business to determine whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is among the most frequent issues with windows. It can alter the appearance of a house and it can also pose danger to your safety. It is possible to repair the wood that has rotted. The first step is to make sure that the cause of the rot has been taken care of. Look for leaks on the roof and other areas that water may get into the wood.
You will then need to remove the rotten parts of the window frame. This can be done with a claw hammer, chisel, or rasp. Once the rotten areas have been cleared it is time to replace them with new wood. It is recommended to use pre-treated wood for this task as it is more resistant to decay. If you are unable replace the wood that has been damaged then you can use filler or wood hardener to strengthen the damaged area. This kind of product will be found in a lot of hardware stores. To achieve the best results, follow the instructions on the label.
After you have repaired the damaged areas of the window sill, it is crucial to protect the area. Apply a water-resistant sealant to the wood. Sikkens for instance is a great one to apply.
It is also possible to use an epoxy filler that is two-part to protect the wood from further damage. This product is easy-to-apply and leaves a nice finish. It is essential to follow the directions on the label. After the epoxy filler dries it is possible to sand the wood’s surface. Start with a rough sandpaper and then move on to an easier grade.
You don’t want to expose the damaged part to further moisture. It is therefore a good idea to cover the area that has been repaired with an oil-based primer which will protect it from moisture. After that, you can apply the waterproof wood sealant.
It won’t open
There are many reasons a window won’t open. Wood frames can warp in wet weather, the house may have settled or someone may have closed it to protect themselves. However, with a little patience and the right tools, many windows that are locked can be opened.
Gunk or debris that has accumulated could be the main cause of windows that aren’t opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, according to Acme Glass. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent corrosion and keep your window operating well.
The pulleys used to raise or lower the window can be loosened, or break. These parts can be weakened and obstructed if they are located higher than two floors above surface.
If you’re having difficulty opening a Window Doctor try using a pry bar to gently force the window open a little at a time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternatively, try running a hair dryer around the edges of the frame for a few minutes to warm the wood and assist it move more easily.
A broken spring could be the reason for a window that won’t lift or lower. Based on the manufacturer of your windows, you will be required to refer to the manual of your owner for additional instructions.
If you’ve tried cleaning and lubricating the moving parts of your windows, but they won’t open, then it may be time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don’t let windows in your home go from being functional to unusable. If your windows aren’t properly closed could leave your home vulnerable for water damage and burglary. Contact us for more information about our windows replacement and services today!