Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that reduces loss of heat during winter and keeps your home cool in the summer. Double glazing windows fixed when they need to is an excellent method to ensure they are operating correctly.

Over time your double glazed windows may experience issues like condensation and misting. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A ball that is rogue or a stone flying from your lawnmowers, or a strong storm can shatter the double pane windows of your home, leaving you home vulnerable to the elements. While a damaged glass window is difficult to repair, it doesn’t need to be replaced. The insulated glass that is between two glass panes is in good condition So you can repair your double-paned windows yourself.

To begin, you’ll need to take the broken glass out of the frame. This will be messy work and you’ll need to be cautious to prevent any glass shards from falling onto the floor or slipping out of the frame. Make sure to wear a pair of work gloves to protect your hands, and a rag to protect the area around the broken glass to avoid further breakage or cuts. After taking out the broken glass, clean the frame of the window thoroughly, removing any sealant or debris. Sand rough areas of the frame to create a smooth surface on which to install your new window.

After cleaning the frame, you can apply another layer of glass to the seam where you removed the broken pane. This is the best method to seal and protect your window. It can also save you money by preventing drafts and water from entering the home. The next step is to choose your glazing material. There are many options available such as clear tape, which is more durable than regular tape and helps prevent further cracking of your window, or glazing film that is similar to clear plastic wrapping. This choice has the benefit that it can be painted to match the frame of your window and will also block out rain and ice.

Whatever the material you pick regardless of the material you select, it is crucial to press glazier’s points into the seam where the putty meets the frame. They will help keep the glass in place and help it adhere to the frame. Glazier’s points can be found in hardware stores, and are available in pre-made ropes which you roll over the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues and if you experience this problem it is best to call the company that installed the window. There are warranties and guarantees to address these problems. Condensation or fogging between the windows’ panes is a sign that the seals are damaged. Only a professional can resolve this issue by replacing both panes.

The process is complicated and requires special tools to take off the old pane and install the new one, however it can be done by an expert who will supply the required equipment. It is best to leave the work to professionals. These tools can be dangerous.

If you do decide to do this yourself, be sure to wear gloves and safety glasses to shield yourself from any broken glass pieces that might fly away during the process. It is also important to carefully remove all putty and metal glazing points from the grooves where the new window will be. Wire-brushing the frame, vacuuming or wiping with a damp cloth is recommended. Once the frame is clean and dry, you will need to get a replacement glass which is 1/8 inch less in each direction than your window that you have and then fit it into the grooves.

You will have to apply a layer of silicone caulk to the grooves of your frames to ensure the glass you are installing is properly installed. After the silicone caulk has dried you can smooth it out and make any necessary adjustments. Then the wood molding can be reinstalled.

Double-glazed windows may be difficult to open or close if the weather changes dramatically. Extreme temperatures can cause the frames to expand or shrink and this can make them fall or stick. If this is the case you could try wiping the frames with water and lubricating the joints. However, it may be best to ask the company that installed your windows to help.

Misted

Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes of your double-glazed windows. Double glazing is comprised of two panes that are separated by a space that is filled with argon for Window Doctor greater thermal efficiency. This results in an airtight seal that keeps warm air inside, and cold outdoor air out.

The seal may become damaged over time and moisture may build up between the glass panes which can cause them to turn to become cloudy. This happens because the sun’s heat causes the space between the window panes, causing water to vapourize.

This is a normal process but if it happens between the window panes, it could cause problems as it can no longer control the temperature in the room, and allows the outside temperature to affect the indoor temperature. If you notice your double-glazed windows are turning blurred, call the experts at Northfield Glass to investigate.

We can replace a single blown sealed unit, without needing to replace the entire window. This is much less disruptive than a full replacement. Our misty glass repair involves taking off and cleaning the glass before replacing it with a new one. This creates an airtight seal and will be watertight.

Certain companies in the business claim that they can inject chemicals through holes into windows with mist to remove the fog and condensation. We do not recommend this method. This method is not only unsightly, but it could also harm the toughened glass and can leave you with windows that don’t completely perform its function.

If you don’t address the issue immediately it could result in mould, which can not only cause damage to the window doctor, Read Alot more,, but also cause health risks for your family members. Moisture can also cause problems in your home, including dampness or rot. In certain situations it is possible to replace the entire window.

Failed or blown

Double-glazed windows consist of two glass panes with an inert or air between them. This increases their thermal efficiency by keeping heat in and the cold out. Over time the gas may be depressurized and cause various issues.

One of the most frequently encountered is condensation between the panes. It’s not an indication of a failure in the window, but it could be a sign you need to reseal them. Condensation could also be an indication of a damaged double glazing, which could require a re-installation.

Double-glazed windows can also create draughts. This could be because of a failed seal or handle that is broken, or a damaged lock. A draught can be noticeable and will lead to higher heating bills It is therefore essential to fix it sooner rather than later. You can test the seals by feeling around the edges of your window frame to determine whether you feel cold air.

Another indication that your window seals have failed is when you begin to notice water beading on the inside of your windows. This is a good indicator that you should seal your double-glazed windows.

Your window frames have been designed to move slightly, which is necessary to keep the glass sheets in place. However, over time, this special packaging material can be compressed and break the all-important seal. This allows air to move between the panes, decreasing the efficiency of your window’s energy consumption.

A damaged seal is a clear indication that your double glazing is damaged and needs to be fixed immediately. A blown seal will prevent your double glazing from fulfilling its primary purpose of keeping cold out and warm in. A damaged seal could let moisture into your home, which could lead to mold and other unpleasant conditions. Contact a double glazing expert as soon you spot a damaged window seal. They can replace the entire unit.