Fiat 500 Key Fob Replacement
If your 500 key fob isn’t working Try using a different one to see if the car can detect it. If it does, then the issue is most likely due to the original fob’s battery, [Redirect-302] or water damage.
First, replace the battery. The “+” side should be facing down.
Dead Battery
Most of the time when a fob doesn’t work, it’s because the battery is dying. It’s not difficult to fix Most fobs notify you that the battery is not fully charged. You can find the instructions for the majority of car fobs YouTube or in your owner’s guide. You can also bring it to a local locksmith or to the dealer that supplied it to you to replace it.
Other times, a device can not function and there could be a problem with the circuit board inside. It’s not common however it can happen. If you drop the fob on something sharp, it could damage the internal chip. It can also happen if you use an aftermarket key, and the fob doesn’t function. In this situation it is required to visit a dealer or locksmith to get the key reprogrammed to work with your 500.
One 2012 fiat bravo key 500 Flip Key Remote that resembles Ilco brand with lock, unlock and trunk buttons. New replacement fiat 500 Key keyless entry remote (will need to be cut and programmed by a locksmith)
Chips damaged
Fiat 500 key fobs are wireless devices that transmit signals to the car every time you press the button. It is equipped with a microchip that contains details about the code required to communicate with your car. If the chip is damaged, it can’t transmit the correct code, and the car won’t start. Locksmiths can repair the damage. United Locksmith can complete this service on both classic as well as modern models, so don’t hesitate to contact us.
Locksmiths can program the new key fob. This is a lot less expensive than going to a dealer and it works similarly. Locksmiths will require specific information from you, including the year that your car was manufactured as well as the name of its model.
Rub the chip with an old dollar bill if not sure what to do. The copper in the bill is abrasive, and can remove oxidation and dirt. However, it won’t harm the microchip. If the chip is physically damaged, it might not be in a position to be repaired. This can happen when you drop it or get it pushed over by your vehicle.
Water Damage
Whether you accidentally dropped your keys in the pool, threw them in your pocket while swimming at the beach or splashed them with water on a rainy day you can be sure that your key fob is likely to suffer water damage. Even if it’s just the smallest amount of water on the key, it can cause serious issues with the electronic components of the key.
The good news is that you can often solve this problem by removing the fob’s key and then using the paper towel to cleanse it of any remaining dirt or water. Once the fob is dry you can replace the battery. It will then begin functioning normally.
You can also take your fob to a local locksmith shop or auto shop to get it professionally cleaned and programmed. The professionals will be able to utilize special equipment to make sure that the key fob is compatible with the car’s computer system.
When the key fob on your Fiat 500 stops working, you might feel angry and stressed. It can be expensive and difficult to transport your key fob to the dealer. Locksmiths can take care of every aspect of your car’s key fob replacement without the necessity of a dealer visit. Because of this, they are a superior choice than a dealership.
Pairing Issues
If you lose your keyfob or it ceases to function and nothing else seems to be wrong, it may be the chip. This could be due to water damage or a dead battery. it could just be that you need to reprogramme it.
Often, this can be accomplished by following the directions in the owner’s manual. However it’s recommended to hire an automotive locksmith perform this procedure if you’re having trouble or the instructions in the manual don’t work for you. This will ensure that your chip isn’t fried and will likely be the least expensive option.
A number of owners have reported that their keys won’t allow them to lock their cars. This could be a problem when you intend to fill up at an gas station. Some owners have even reported their 500’s locking mechanism breaking and having to replace the entire intermediate shaft of the steering. Fiat has actually mentioned this issue in a technical bulletin (TSB).
If you’re experiencing issues with your Fiat, the services of a reliable locksmith can help. They can duplicate your current key or create a new one that locks and starts the vehicle. They can do this without having access to your old key, and it’s typically cheaper than buying a new one from the dealer.