Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows or doors aren’t aligned properly or are difficult to use.

You will lose energy in the event that your double-glazed doors fail to function properly. This also increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at an affordable price.

Snapped Key

It can be quite frustrating when a key gets stuck inside the lock. It could also be a security risk in that it can leave you vulnerable to burglars if your door is not locked. There are fortunately quick fixes you can use to solve the problem and get your door working properly once more.

First, remember to stay calm. If you panic and start doing a lot of fumbling around you may end up pushing the damaged piece of the key even further into the lock, which could make the situation worse.

Next spray WD-40 or another penetrating oil into the lock to help the broken piece slip out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you have a part of the key that is still sticking out then grab it using a paperclip or Window Doctor other thin metal object and pull it. Both methods work, but you must be careful not to push the broken key further into the keyway.

Some paperclips have grooved edges, which can be used as a hook extractor and Jigsaw blades also work for this use. If you don’t happen to have any of these, you can bend a hook using needle-nosed pliers. Finally, a pair of tweezers is a good way to grasp and pull out the last bit of the broken key.

If you can’t get the broken piece of key out, try using a lock de-icer. It’s available in many hardware stores and works by freezing any moisture present inside the lock.

If none of these tricks are working, it might be time to call in locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door mechanisms and locks that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are more easy to use. Get a double glazing repair through us online, or give us a phone call to discuss your needs.

Broken Cylinder

A damaged cylinder could pose a major security risk. A locksmith professional can repair the cylinder. To repair the cylinder, a locksmith will need to tap it. This can be done using a hammer, or any other tool. However, the most effective method is to make use of a wire or a long match. Then, position the end of the match or wire in the keyway. The locksmith will then strike the lock in order to break it. This is far better than using a hammer that could harm the lock.

Overheating is the most common reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made of various metals, including cast iron and aluminum. Different metals can be heated and cool at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion can be a cause of fractures in cylinders. When the cylinder head and cylinder block are not properly maintained, this can lead to rusting or corrosion and cause them to expand at a more than they should. As time passes, this may also lead to cracks.

If your uPVC door or window lock is brittle or requires a lot of pressure to turn, this can be the result of many things. This can be caused by a faulty locking mechanism, or misalignment or a worn-out handle.

This is a simple and inexpensive fix that most double glazing owners can accomplish. A professional locksmith will usually be able solve this issue within a matter of hours of arriving at your home. Depending on your needs, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders that provide an additional layer of protection from burglars. It’s a small price to pay for the security that comes from knowing your uPVC doors are secure.

Broken Handle

Window handle locks have intricate mechanisms that deteriorate with time and usage, so it’s no surprise that they sometimes break. If yours breaks, it can be difficult to identify the cause of the issue and make sure you fix it correctly.

If the issue is with the internal locking mechanism or the latch, fixing your broken handle can improve your uPVC double glazing door’s security as well as help you to stop the draughts. If you do not repair or replace your handle can be costly and may cause damage to the door’s frame and lock, so it’s worth taking the time to do it right.

Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be on the inside face of the back plate, and is normally concealed by an aesthetically pleasing cover for the screw reasons. You should not lose any internal parts of the handle like the levers and plates on either side. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, using another screwdriver, loosen the screw that connects the handle with the spindle in the back. Once the screw is free, you can take the handle off and take the broken spindle out. Replace it with a brand new one, ensuring it’s the same size as the previous one (you can typically find these on the internet or in hardware stores) and securely screw it in the right place. Be careful not to tighten too much because this could cause damage to the handle or the window frame.

Make sure the new handle is installed after which you can close and test the handle. It should operate smoothly and you’ll be able open your window once again.

While you’re working on the handle, don’t forget to check your uPVC windows are closing properly. If they aren’t closing properly, you could experience draughts or damp in your home. You could also compromise the energy efficiency of your home. A local window replacement company, such as Core Sash Windows, will be able to adjust the hinges on your window replacement near me frames to ensure they are able to shut properly.

Broken Spindle

It is usually the case that the spindle within the handle is broken, not the handle itself. This is especially common with uPVC tilt-and-turn windows. These types of windows require a handle that operates a locking mechanism in the frame of the window Doctor. The handle is attached to a central rod that triggers the cams with a mushroom shape that secure the window frame keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has broken and this could be a frustrating problem.

Luckily there are steps that can be taken to remedy this situation. A reputable locksmith can quickly and effectively fix this issue. A reputable locksmith can disassemble the window’s handle using a tool to take out the wheel part where the spindle is located. This is done without damage to the handle or window frame.

After removing the wheel the technician can inspect the spindle and identify the cause of the break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. This procedure is typically performed by technicians in an environment that is clean.

The next step is to clean the damaged spindle, this assists in removing any debris or dirt that could be hindering its normal function. The spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is similar in size to the original. Then, he will drill matching holes into both pieces. This ensures that the new spindle has a precise fit with the handle.

If the damaged spindle cannot be repaired it may require replacement completely. Home centers sell generic replacements, but if the design of your window is unusual then it is necessary to speak with a woodworker or cabinet maker who can replicate the exact model for you. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle and the frame existing screws. Once the handle is securely in place, you can use your uPVC windows.