Ghost Immobiliser Installation

Add a ghost immobiliser to your car and protect it from thieves. Our TASSA verified system protects vehicles from hacking, key cloning and vehicle immobiliser bypass.

The system is hidden inside your vehicle’s wiring loom, autowatch ghost Immobiliser fitting so it is completely invisible to anyone who looks. It operates by creating an e-pin code push sequence by using buttons already present on the steering wheel doors, door cards and the center console.

No circuit cuts

It’s not a surprise that people are keen to secure the car they’ve put so much effort into buying. However, traditional security devices like wheel locks and alarms can easily be snatched away or bypassed by thieves. Ghost immobilisers are a very effective and efficient solution that operates in silence and isn’t easily recognized by modern day thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This creates an unique pincode only accessible to you. The code can be changed at any time and can be as long as 20 digits long depending on the style you prefer. It also comes with a safe emergency code you can use in case you forget your PIN.

The ghost immobiliser can also be used to prevent relay boxes from transferring your car key’s signal from inside your home, which would open the doors and begin the vehicle. It can also block advanced methods of stealing your vehicle, such as OBD port hacking. The device is small and weatherproof, so it’s hard to spot and is also difficult to alter with.

Another advantage of the ghost immobiliser is that it can be fitted inside your car without permanent marks. It’s ideal for those who are planning to sell their vehicle in the near future. It’s also a lot more efficient and less time-consuming to install than the factory-installed system.

The Autowatch Ghost is a revolutionary next-generation device that blocks contactless stolen cars by connecting to the vehicle’s CAN data network and using the existing buttons to generate a unique PIN. This is a stealthy device that can be installed without wires being cut and does not require any additional key fobs. It can also be connected to the vehicle’s original ECU, preventing thieves from gaining access to it using a new key or replacing the ECU with an “relay”. This system is TASSA verified and can be connected to an International Security Register, allowing owners to have confidence that their vehicles are secure from theft.

No RF scanning

You will want to protect your vehicle from theft if you have spent lots of money and effort to customize it. Installing an immobiliser is one of the best ways to stop theft. It will stop your vehicle from starting until you input a unique code. Using the buttons on your steering wheel as well as the dashboard, you can generate an up to 20 digits long that is only known by you, ensuring that only you have access to your vehicle. It is also possible to set up a service or valet mode that will allow you to start your car for a short period without entering the PIN code. This allows your technician to work on your vehicle without your presence. This is an excellent option for those looking to cut down on time and make their lives simpler.

A ghost immobiliser is a next-generation device that connects to your vehicles CAN data network and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend in with the vehicle’s design, as it doesn’t emit any sound or light indicator. It can be put in anywhere on your vehicle without affecting the aesthetics.

This stealthy device is TASSA approved and can reduce your insurance costs. It also comes with a tracking function that allows you to locate your vehicle even if it has been stolen. This is a great feature if you own a rare, expensive vehicle which you’ve invested many hours customizing.

autowatch ghost immobiliser fitting – https://williamson-keating.blogbright.net/ – Ghost, in conjunction with the iPhone app allows you to remotely start your car when you’ve lost your PIN code or are unable to access your vehicle. This feature is perfect for those who need to run errands or pick up your kids but don’t want to risk having someone else drive your car. This feature is beneficial if you have to take your vehicle in for repair or service.

Another benefit of the Ghost is that it does not transmit or detect radio frequency signals, which makes it unnoticeable to thieves who use RF scanning or code grabbing technology. It can also protect your car against key cloning and ECU swapping as well as other common methods of car theft.

No key cloning

Ghost immobilisers can be an excellent method to protect expensive cars and stop key copying. They prevent your car from being started without a PIN code being entered in conjunction with the standard key fob. This makes it extremely difficult for thieves to rob your vehicle and could deter them from doing it initially. This is a particularly good option if you’ve invested an enormous amount of time and money customizing your vehicle, or own a rare or expensive model.

The immobilisers are connected to the vehicle’s CAN data network and autowatch ghost immobiliser fitting are completely hidden meaning there is no indication of its presence within the vehicle. It is also difficult to spot by using radio frequency scanning technology or code grabbing. This means that a burglar must spend longer in order to get your car.

To bypass the system, thieves must be aware of the pin code and the location of the Ghost. But, the pin code will be specific to you and can be altered as many times as you like. The pin code is simple for you to remember but mathematically unattainable for someone else to work out. The engineer will also have provided an emergency PIN code in case you forget your pin.

The Ghost CAN Bus immobiliser can be installed in a matter of minutes on your vehicle. It can be used with any vehicle and can be completely customized to match your car’s look. It is also easy to use and is affordable. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, providing that the new vehicle what is a ghost immobiliser compatible with the.

The CAN bus is compatible with other security features. For instance, it could detect damage to your vehicle and alert the owner. It also can stop the engine if the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect any vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost is a hidden immobiliser module connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is a significant improvement over the traditional methods that have been employed by thieves in the past to steal your vehicle. The CAN data networks also means that your system won’t be affected by disconnecting or change your battery.

The Autowatch Ghost is the world’s first aftermarket CAN bus that is a non-detectable immobiliser that safeguards against key-cloning, hacking and theft of replica cars. It is not equipped with LED indicators or key fobs, instead using the buttons in your steering wheel, centre console and door panels to allow you to create a unique PIN sequence (up to 20 button presses) that must be entered before you can drive your car away.

Modern thieves are able to use diagnostics to detect circuit breaks in your vehicle. They can bypass immobilisers that require a lot wiring or are integrated in the wiring. The Ghost is weatherproof, doesn’t need any additional wiring and cannot be identified by diagnostic tools that are professional. It can be used on vehicles with anti-theft devices.

Another major benefit of the Ghost immobiliser is that your vehicle is only able to be started by someone who has the PIN code and has physical access to your car. This is a big benefit over security systems that are able to be bypassed using cable tampering, a screwdriver or a universal remote controller.

You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on your mobile or computer. This is helpful in the event that you have to start your car when it’s left in a garage or at valet parking.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It has a QR fingerprint system for individual parts to be identified which allows the return of stolen components in the event of their being found, and it can be set to’service mode’, which will allow the engine to start when your vehicle is in a garage or with valet parking services, but you will need to enter your PIN number to get out of the car.