How to Replace a UPVC Window Handle

Don’t be worried when your upvc handle has become broken. Replacing a window handle made of upvc is a fairly simple job and can be accomplished in a matter of a few steps.

Whether you have a cranked or inline espagnolette window handle, all of them come with a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.

Identify the type of lock and handle

Over time, window handles and locks can get damaged or lose functionality. It is possible to fix this problem without having to replace the entire uPVC unit. One of the first things you need to do is determine the type of lock and handle you have to determine the replacement parts you will need.

You can identify the type of handle by looking at its base. A screw or pin will hold the handle to its base. If the screw is missing, it could be a sign the handle has separated from the base. If the handle has broken internally and no longer grips onto the spindle, this could be a sign that it is in need of replacement.

There are many uPVC handles however the Espag handle is the most common. They are usually secured by two bolts and feature an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are used on uPVC tilt and turn windows.

Another kind of uPVC window handle is the Cockspur handle. They are similar to the Espag handle, but they have a low projection from the frame. These handles are generally used on older uPVC window frames.

Finally, there are also Venetian window handles that are similar to the Espag handle but they have a flat base that allows them to be positioned to the frame. They are an excellent choice for homeowners who want a stylish, elegant handle that will blend in with their uPVC window frames. They are available in a variety of colors that will match any design.

Measure the spindle

It’s important to be aware of how the handle installed before you can order a replacement. This will tell you how it is tight or loose and if it will fit properly into the window frame. This can be accomplished by identifying the handle’s type and measuring the spindle. The spindle is a metallic shaft that connects your handle to the lock inside the window frame. It’s available in various sizes and the current industry standard being 8mm. Older handles could have a 9mm cross-section, therefore it’s essential to measure the old one to make sure you get the proper size replacement.

There are many kinds of window handles, but the most commonly used are inline Espagnolette and Cockspur handles. These handles operate a locking mechanism in the window. They use shootbolt rods to secure the window after it has been closed. They are held in place with pins or Glass window replacement screws based on the kind of handle you have.

You can buy Upvc handles that are replacement windows near me on the internet or in many DIY stores. They come in a range of finishes and are suitable for both new and replacement windows. For added security, they can be either key-locking or non-locking fire-escape.

To remove the old handle just open the window towards the door and remove all screws that hold it in place. Keep the screws in a container to avoid damage. Once the screws have been removed, gently pull out the handle and take a measurement from the base to the top of the spindle. This will provide you with the information you need to buy the correct replacement. The spindle of the handle is the iron shaft that connects it to the gearbox that locks the window frame.

Remove the old handle

Changing the uPVC window handle is a simple task that typically requires less than five minutes if you have the proper tools. The first step is to determine the type of lock and handle that will help you identify the right replacement. After that, weighing the spindle will help ensure that the new handle is a good for the job. The handle that was used previously needs to be removed and replaced with the new one.

The majority of uPVC handles are inline Espagnolette handles, which are equipped with a central spindle that slots into the window’s locking mechanism. They are generally simple to remove, but they may require force if they get stuck. There are typically two screws that keep the handle in place, which can be removed with a screwdriver or pliers. Depending on the type of handle, you may be required to take out the pins that hold it in place.

After removing the screws you can take off the handle that was previously attached. The top of the base plate will be visible when the handle is in the open position, revealing two more screws that you can remove. If the sticker is still visible, you’ll have to remove it.

It is now possible to screw into the new handle using the screws from the previous handle. Make sure that the handle is in the open or unlocked position, then align the screw holes with the ones on the window. After you have done this you can replace the cap screws. Test the new handle. It’s simple to swap the uPVC, however you must make it right.

Install the new handle

It’s time to put in your new handle if you’ve successfully removed the old one from the frame. Begin by locating the screw covers and levering them out with your screwdriver. After the screws are removed, place them in a secure location before moving on to the next step.

Then screw the spindle into by aligning it with the hole that is already in place. Make sure that you align the holes in the handle with the holes in the window frame and make use of a screw similar in length to those used previously, or it could cause the handle to not being secure.

The uPVC Espag handle comes fitted with a spindle of 7mm square that rotates the lock mechanism that is mounted on the window. This style of handle is present in the majority of modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) come with a long nose that locks over the frame’s outer or transom bar cross member and are often found in older uPVC windows.

It is essential to lock and unlock the window several times after the handle has been installed. If everything goes according to plan then your new uPVC window handle should be securely attached and operating smoothly. If not, the steps above will allow you to identify any problems and get it fixed quickly. If you are struggling with your uPVC handle or any other glazed home improvement issues, don’t hesitate to contact us at Bridgewater Glass window replacement for professional assistance. Our glaziers are trained to repair or replace a variety of window handles and frames, making us an excellent choice for your double-glazing needs.

Test the new handle

In time and with regular use over time, uPVC locks and handles are susceptible to damage and wear and tear. This can make them less secure and effective which is why it’s important to replace them right away. It’s also a good idea to do when you are upgrading your windows. Change your handle and locking mechanism will help maintain the integrity of your new windows.

There are a variety of styles of uPVC window handles. Some are fixed by pins or screws, while others feature blades that fit into the lock mechanism. Each type has a different way to replace it, so you have to know which type you own.

Espag window handles are the most popular type, and they’re typically found on newer uPVC windows. These handles come with a spindle that extends from the handle and into the gearbox of the lock and when you open the window, it activates the locking mechanism. They’re also easy to remove however, you must take care not to damage the mechanism or the handle when doing so.

Cockspur handles are another option for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the striker plates that are wedge-shaped on the frame. This kind of handle is more difficult to fix than other kinds however, it’s still an ideal choice for many homes.

Venetian handles are attached by two bolts, and they have a narrow projection on the frame. This differs from the Espag handle. They are ideal if you need an flush handle that blends with your uPVC windows. These are a great option for residential and commercial properties.