Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don’t rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double glazing repair-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you’ll need find some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

If you plan to try to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it’s a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It’s crucial to act immediately if you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To do this, you’ll have to open the window to access the frame. After that, using the screwdriver, you’ll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you’ve repositioned the hinges, close your window and check for fitting. If you’re satisfied with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it’s essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. The majority of the time it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It’s relatively easy to repair a loose uPVC handle. First, you’ll need close your window and do a test to ensure that it fits. The corners of the sash should align with the casing joint. If it doesn’t you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it’s important to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This can make your window more difficult to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or uPVC repair sagging. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with a breeze it could be hinges at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a very simple process but it can be easier to do if you have someone to help you hold the frame up.

Check that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or due to improper installation in the factory. Sending us photos via our website will often resolve the problem. We are more than happy to give suggestions.

It is also important to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc repairs near me can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash joins the frame. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. Second, the interlock can also become misaligned. It is located on the hinge’s side and might require to be cleaned. In some instances it is possible to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come the point when it’s more efficient to replace them than fix them. If you encounter any issues with your upvc window, it’s best to consult an expert immediately.