UPVC Window Handle Replacement
Replacing a damaged window handle is a relatively easy process, and, with the right tools, it can be accomplished quite quickly. It is important to know your type of handle and the spindle’s length prior buying a replacement.
Older uPVC window handles have a spur which extends and is locked over the cockspur wedge striker. These can be either left or right-handed and must be to be replaced with the same handle.
What kind of lock and handle do I have?
There are many windows locks and handles made of upvc each with their own advantages and purposes. The type of handle you choose will determine if the locking mechanism you have is effective and also if it is simple to open the windows. As time passes and with regular use, upvc window handles may become damaged or worn out, making them less effective and secure. In some cases they may even fall off completely. If you find that your window handles have been removed, it’s crucial to fix them as soon as you can. This will prevent possible break-ins, and upvc window handle replacement keep your house safe.
It’s a simple job that virtually anyone can perform. With a few basic tools and the right information, this is a simple procedure that should take no more than a couple minutes. It is important to know the type of lock or handle you have on your window. This will help you select the right replacement.
Inline Espagnolette Handles
They are typically found on the side of the window. They are flat in design and come with a latch that connects to the locking mechanism on the window frame when turned. Inline upvc handles feature an elongated spindle that runs through middle of the handle into the window frame to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames and have an unusual hook-shaped design. Cockspur handles have one screw that is used to secure the handle to the window frame and are not as secure as other types of window handles.
Handles that turn and tilt
As opposed to the other handles made of upvc the tilt and turn handles can both be rotated to open the windows and the handle can be tilted to the side to allow ventilation. In general, they have a 7mm spindle at the side of the handle. They are available in left and right handed versions.
It is important to measure the size of the spindle when purchasing a replacement upvc handle. There are a few that are the exact same size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole and measure the distance it travels before it reaches an obstruction. This is the length of the spindle that will be suitable for UPVC Window Handle Replacement your window.
What is a spindle?
uPVC window handles work in a similar manner to doors. By turning the handle, you will be able to operate a latch within the frame. The window then opens and closed. The handles can become damaged, especially if often used or are subjected to harsh conditions. This can leave you needing to replace your uPVC handles on windows since they may not operate the glass window replacement correctly for a long time.
There are a variety of uPVC handles available including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. It is essential to determine the kind of handle that is installed on your uPVC windows so that you can replace it with the right one.
You can check what type of uPVC handle you have by taking a look at the base of the handle. There should be a “snap-in cover’ over one screw that holds the handle’s base in the correct position. Once you remove this, you will be able observe the second screw that holds the base of the handle in place. Once both screws have been removed then you should be able to pull the handle from the uPVC.
After you have removed the uPVC handle, carefully unscrew it from the locking mechanism. Take note of the length of the spindle. You’ll need purchase a new one that is the same length as the original handle and locking device.
The spindle wears out and cannot operate the locking mechanism. This could be due to corrosion, damage due to continuous use, or even an unreliable locking mechanism. When this happens it is required to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.
How do I remove my old handle?
Over time and through everyday usage, window handles could be damaged or destroyed, and if this happens it is essential to fix them as soon as possible to ensure the safety of your home. It is simple to replace a damaged or worn handle. The job can be completed in under an hour without the need for special tools.
To remove the handle, you must first remove the screw that is located at the base of the handle. Once the screw is removed, the handle can be pulled away. There is a second screw that is located at the bottom of the handle base, and it is able to be removed as well. Once these two screws have been removed, the handle will be removed from the base of the window.
Once the old handle is removed, grab the new handle and line up the fixing holes with the holes that are currently in the window frame. If there is a sticker or cap on the new handle remove it if necessary and then screw the handle into place. Once the handle is in place, it is important to test that it works by turning the handle and making sure that the lock mechanism activates.
Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over the frame’s outer or the transom bar cross member within the window.
After you have put in the new handle, place the spindle into the window lock and tighten it. When the handle is fixated, replace the’snap in’ cover and the screw cap (if appropriate). The handle is now ready for use by opening and closing the window several times to ensure that it works properly and securely.
How do I fit the new handle?
Changing your uPVC window glass replacement near me handle isn’t a big deal and the process is quite simple. All you need is a screwdriver and small amount of patience. The first thing to do is make sure that the old handle is in the unlocked position and then take out any screws that are visible, you can also replace them by screw caps if you need. After removing the handle you’ll need to record the length of the spindle which extends from the back. This is important as it will determine what type of handle you need to buy.
Espagnolette handles made of uPVC are the most popular kind of handle. They have a spindle that is connected to the handle and operates a locking mechanism within the window frame. The handle opens the latch, allowing the window to open. Over time and through regular use, espagnolette handles can become damaged or impaired and it is necessary to find a replacement.
Cadenza handles are a form of uPVC handle that is commonly used in tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. You can replace them with the same method that you would for espagnolette handles however, ensure that the new handle is not angled and flat.
Once you have selected the right handle, simply align the new handle to existing screw holes before screwing it in place. Then, put the screw covers back on and verify that the new handle is working correctly. You can do this by dragging the handle back and forth from the locked position to the unlocked several times. If you have any issues, it may be worth contacting a specialist to determine if they can help resolve the problem. They can advise you on how to fix the problem in a timely and efficient manner.