Double Glazed Window Repair

Double glazing is a fantastic investment in energy efficiency. It helps prevent loss of heat in the winter months and helps keep your home cool during summer. Repairing your double-glazed windows whenever required is a great method to keep them in good working order.

Over time condensation and misting could impact your double-glazed windows. Double glazed windows may become difficult to open and close.

Broken Panes

A rogue baseball, a flying pebble from your lawnmowers, or even a heavy storm can shatter the double panes of your windows and expose your home to the elements. While a damaged window may be difficult to repair, Repairs you don’t have to replace it completely. The insulated glass between two glass panes is in good condition and you can fix your double-paned windows yourself.

First, you’ll need to remove any broken glass from the frame. This can be a messy job and you’ll need to be careful to stop any glass fragments from falling onto the floor or slipping out of the frame. Use a pair of work gloves to protect your hands and a cloth to protect the area surrounding the broken glass to prevent further damage or breaks. After removing the broken pane, carefully clean the entire frame of the window to remove any remaining sealant or debris. Sand rough areas of the window frame to create a smooth surface on which to install your new glazing.

After cleaning the frame after cleaning, you can apply a second layer of glass to the area where you removed the broken pane. This is the best method to ensure your window stays safe and sealed and will save you money by keeping water and drafts from entering the house. The next step is to choose your glazing material. There are several options available, including clear tape that is more robust than regular tape and will help keep your window doctor near me safe from further cracking, and glazing film that is similar to clear plastic wrap. This choice has the benefit that it can be painted to match your frame and will also block out rain and ice.

No matter what material you decide to use, it’s important to press the glaziers points into the seam where the putty meets your frame. These will hold the newly-formed glass in place and help it to adhere to the frame. Glazier’s points can be found in hardware stores, and they come in pre-made ropes that you simply roll over the frame rabbets.

Condensation

If you are experiencing issues with condensation, it is best to contact your window manufacturer. Many companies offer warranties and guarantees to will cover the issues. Condensation and fogging in the panes of glass is a clear indication that the seals between your windows have been damaged and must be repaired by a professional who will repair both panes.

This process is a little tricky and requires the use of specific tools to remove the old pane and then install the new one, but it can be accomplished by an expert who will provide the required equipment. Utilizing these tools could be dangerous, however, so it is always best to leave this type task to an expert.

Wear safety gloves and glasses if opt to do it yourself. You may be exposed to flying glass fragments. It is also important to carefully remove all putty and metal glazing points from the grooves in which the new window will go. Wire-brushing the frame or vacuuming it with a damp cloth is also recommended. When the frame is dry and clean, you will need to order a piece of replacement glass that is 1/8 inch shorter in each direction than the window, and then test it into the grooves.

Depending on your frames You will then have to apply a layer of silicone caulk to the grooves to ensure that your new pane is securely in place. After the caulk is dry and is dry, you must smooth it and make any adjustments needed. Then the wood molding can be reinstalled.

If the weather abruptly changes, double-glazed windows may become difficult to open or close. Extreme temperatures can cause frames to shrink or expand and, as a result, they can fall or stick. If this is the issue try wiping the frames with water and then lubricating the joints. However, it may be best to contact the company that installed your windows for help.

Misted

Misted Double Glazing is a window problem that develops when moisture gets trapped between the glass panes of double glazed windows. Double glazing is comprised of two panes, which are separated by a gap filled with argon to improve thermal efficiency. This creates a airtight seal that keeps warm indoor air inside, and cold outdoor air out.

This seal can become damaged over time and water can accumulate between the panes of glass and cause them to become misty. This happens because the sun’s heat causes the gap between window panes, causing water to vapourize.

This is a natural occurrence however, if it happens between the panes of the window it can be a problem because it will no longer be able to control the temperature within the room. Instead the temperature outside the window will affect the temperature inside. If you notice that your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single sealed unit, without the need to replace the entire window. This is far less disruptive than a complete replacement. Our misty glass repair involves removing and cleaning the glass unit, then replacing it with a new one. This will create an airtight seal again.

There are companies within the industry which claim to drill holes into your windows that are misting and Repairs inject chemicals into them that they say removes the condensation and fog but we do not recommend this procedure. This method is not only unsightly, but it could also harm the toughened glass and result in windows that do not completely perform the function it was intended to.

It is important to fix the problem as soon as you can, because if left untreated, it can result in the growth of mould, which not only damages the window but can also pose health risks to your family. Moisture can also cause issues within your home, such as dampness or rot. In some instances it is possible to replace the entire window.

Failed or Blown

Double-glazed windows are comprised of two glass panes with an air or inert between them. This increases their thermal efficiency, allowing the cold out and heat in. Over time, this gas may depressurize and cause a variety of issues.

Condensation in between the panes is among the most frequent. It is not a sign of a window failing, but it could be a sign you should reseal the windows. Condensation could also be an indication of broken double glazing, which will need to be replaced.

You should also look out for drafts coming through your double-glazed windows. This could be caused by the seal being damaged or a damaged handle lock. A draught can be noticeable and will lead to more expensive heating bills, so it is important to fix it sooner rather than later. Test the seals around the window frame by feeling the cold air.

Another indication that the seals on your windows have failed is when you start to notice water beads on the inside of your windows. This is a sign that you will need to re-seal your double glazed windows.

Your window frames are made to move a bit as they have to do in order to keep the glass sheets in their place. However, over time this particular packaging material will become compacted and this will break the all-important seal. This will allow air to flow between the panes, reducing the efficiency of your window’s energy consumption.

Double glazing that has broken an air seal is a sign of failure and needs to be repaired as soon as possible. A blown seal stops your double glazing from fulfilling its primary function that is to keep the cold out and warm air in. A blown seal could let moisture in your home, which could cause mold and other unpleasant conditions. It is important to contact a double glazing repair expert as soon as you spot a damaged seal in your double glazed windows, as they can replace the whole unit.