Window Repairs

Window repairs can save homeowners money and make their homes warm. Window replacements may be required in the event of serious damage like broken glass or a window frame that has been smashed.

Other issues can be solved to prolong the longevity of windows. Some common problems include:

Cracked or broken Panes

It’s a rock that’s been that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, window Doctor cracked window glass is not only unattractive but can lead to higher electric bills since the broken pieces allow cold air to enter your home. Luckily, it’s typically simple to repair windows with broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may have to employ a utility knife to remove any remaining putty or old glazing compound that has accumulated around the edges of the frame. Then, clean the glass’s surface and the frame’s wood with a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is waterproof around the frame’s perimeter. This will prevent water from leaking into the frame through the crack and cause further damage.

If you have double glazing-pane glass cracks that are severe could damage the gas layer between the panes, making your windows less efficient in insulating. If the crack is severe enough to compromise the quality of the glass or in the case of an inner pane completely missing, it might be the time to call an expert.

Cracks caused by thermal stress can happen when there’s a dramatic difference in temperature between the inside and outside of your home, causing the glass to expand or contract. If the cracks are located on two sides of a glass, it is best to replace it instead of attempt to repair it.

If your windows are cracked and not yet ready to be replaced Clear tape can do a decent job of preventing the crack from spreading and keeping out bugs and cold air. You can also cut the length of a nylon stocking to completely cover the crack and then glue it to the surface with duct tape. This isn’t a long-term solution however it can be useful in a pinch and it keeps cold air and insects from entering your home. If you notice cracks on your older windows You should consult the local company to determine whether replacing the entire window is the best option.

Rotten Wood

Wood rot is a frequent problem for windows. It can affect the appearance of a home and can also be a safety risk. It is possible to repair damaged wood. The first step is to ensure that the cause of the rot has been addressed. This can be accomplished by checking for leaks in the roof or gutters that are not functioning or cracked caulking, as well as other areas which allow water to penetrate the wood.

The next step is to get rid of any rotten areas of the upvc window repairs frame. This can be done using an axe, a claw hammer, or rasp. Once the rotten areas have been eliminated it is time to replace them with new wood. Pre-treated wood is suggested for this project since it is resistant to the onset of rot. If you are unable to replace the wood that has been damaged, you can try using filler or wood hardener to repair the damaged area. Many hardware stores will have this type of product. Follow the directions on the label of the product to ensure the most effective results.

After you have repaired the damaged areas of the Window Doctor sill, it is crucial to protect the area. Apply a water-resistant sealant on the wood. Sikkens for instance, is a great product to apply.

Use a two-part epoxy in order to safeguard the wood from further damage. This product is easy to apply and provides an excellent finish. However, it’s important to adhere to the instructions for application on the label. After the epoxy filler has dried, you can sand the surface of the wood. It is best to start with a rough piece of sandpaper and then move to a smoother one.

The most important thing you don’t want to do is to make the area that has been damaged by expose it to more water. So, it’s an ideal idea to cover the repaired area with an oil-based primer that will shield it from moisture. Then, you can apply the waterproof wood sealant.

It won’t open

There are a variety of reasons a window won’t open. The house might have shifted or the wooden frames may have warped in humid weather. Somebody may have nailed them shut for security. With a little patience and the right tools you can open most stuck windows.

The accumulation of gunk or debris can be a major reason of windows that aren’t opening. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spraying grease on these areas to help to prevent oxidation and keep your windows functioning properly.

The pulleys that raise or lower the window could become loose, or even break. These components may lose tension and cause obstruction particularly when the window is two or more stories higher than the ground.

If you have difficulty opening a door, you can use a pry-bar to gently push the window open. Place a wood block on the frame to give your pry bar more leverage, and be careful not to damage the window or the wood. Alternately, you can run a hair dryer along the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

A faulty spring can also be the cause of a window that won’t lift or lower. You will need to consult your owner’s guide for more details depending on the person who made your windows.

If you’ve tried cleaning the moving parts of your windows and lubricating them, but they’re still not opening it could be the right time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don’t let your windows go from functional to unusable since a window that isn’t properly shut can leave your home vulnerable to water damage and burglary. Contact our team for more information about our replacement windows and services today!