Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows could cause severe damage to your home and even be fatal. It is crucial to take the time to make sure that you’re doing everything you can to keep your windows in good repair.
Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. However when you have double-pane windows that are secured by internal beading, it’ll be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you are going to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.
It’s a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since this will offer the best of both worlds.
2. Sagging
uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues, including sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it’s important to act quickly to stop the issue from becoming worse.
To fix a window that is sagging you can try repositioning the hinges. To do this, you’ll need to open the window so that you can get to the frame. With a screwdriver, Window replacement near me you can remove the hinges at the top and window replacement near me bottom and adjust them by turning them clockwise or anti-clockwise. Once you’ve repositioned the hinges, shut your window and test it for an appropriate fit. If you’re satisfied with the fit of the window, you can tighten screws to hold them in the right position.
If you are unable to move the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It’s relatively easy to fix a loose uPVC handle. You’ll first need to close the window and then perform an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn’t then you can use a screwdriver to loosen the handle and reverse the mechanism back into position.
3. Water Leaks
It is important to take action if awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will only make your window more difficult to clean and decrease its energy efficiency.
It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.
Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal rather than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges at the fault. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.
Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It is very easy to change a window hinge but it’s much easier if someone else helps hold the frame.
It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should open.
window doctor hinges that aren’t working properly can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us a picture through our website can often solve the issue. We are always happy to provide assistance.
Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.
5. Draughts
Draughts can be caused by several different things. The hinges can also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it might be necessary to get them re-aligned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace the hinges.
The second most frequent reason for draughts is Window Replacement Near Me seals. They are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.
One of the most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cozy!
The windows made of upvc can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them rather than repair them. If you are experiencing issues with your upvc window you should consult an expert as soon as possible.