Double Glazing Door Lock Repairs

Are your uPVC door or window mechanism broken? Perhaps the handles on your uPVC windows or doors aren’t aligned properly or are difficult to use.

You’ll be wasting energy in the event that your double-glazed doors fail to perform as they should. This also increases the risk of burglary. Owen the Locksmith can repair your door lock for a reasonable price.

Snapped Key

It can be quite frustrating when a key gets stuck inside the lock. It also poses an issue for security, since the door may not lock and leave you vulnerable to burglars. Fortunately, there are quick fixes you can use to solve the problem and get your door functioning properly once more.

First, remember to stay calm. If you panic and begin doing a lot of fumbling around, you might just end up pushing the damaged piece of the key further into the lock, thereby making the situation much worse.

Spray WD-40 or another penetrating oil, into the lock. This will allow the broken piece to come out more easily. You can also employ a screwdriver in order to break up any stuck pieces that could be hindering the flow. If you have a part of the key that is still sticking out and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods work, but you must be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors and jigsaw blades are also suitable for this function. If you do not have any of these handy, you can use needle-nose pliers that bend to create a hook. You can also make use of a pair of tweezers to grab and remove the last bit of the broken keys.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It is available in most hardware stores and works by freezing any moisture that may be present inside the lock.

If none of these solutions work, it might be time to contact a locksmith. Fitlocks experts can solve problems like broken handles or snapped keys with uPVC locks and door mechanisms. They can also reconfigure the double glazing door mechanisms to ensure that they are simpler to use. Book a double glazing repair through us online, or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose a major Double Glazing Repair security risk. It’s fortunately a simple repair for an expert locksmith to complete. A locksmith will have to tap the cylinder in order to repair it. This can be accomplished with the hammer or other tool. However, the most effective method is to make use of a wire or a long match. Then, position the match’s tip or wire in the keyway. After that, the locksmith can hit the lock to break it open. This is much safer than using a heavy hammer, which could harm the lock.

Overheating is the most common cause of cylinder heads cracking. This can happen when the block and cylinder head are made of various metals like cast-iron and aluminum. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand quicker than the rest.

Another reason that could cause cracks in the cylinder is corrosion. If the cylinder head as well as cylinder block are not properly maintained, it can cause corrosion or rust, which may cause them to expand at more than they should. This can lead to cracks in the future.

If your uPVC window or door lock is stiff and requires a lot of pressure to turn it could be due to a variety reasons. A faulty locking mechanism, misalignment, or an old handle are the most common reasons for this issue.

Fortunately it’s a simple and inexpensive fix for most homeowners of double glazing. A professional locksmith will typically be able solve this problem within an hour of arriving at your home. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and change the gearboxes. A professional locksmith will be able to inform you of the most cost-effective option for your home. They can recommend upgrading to 3 Star TS007 Euro Cylinders which provide an additional security layer from burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

It’s not a surprise that window handle locks can break. They have complex mechanisms that become less effective over time. If yours breaks it may be difficult to identify the cause of the issue. Make sure you fix it properly.

Fixing your broken handle, whether it’s the internal latch or locking mechanism will increase the security of your uPVC door and prevent draughts. It could be costly to repair or replace your handle if it is not done correctly and can also damage the frame and lock of your door.

With the window open, loosen the screw that secures the handle with the screwdriver. The screw should be on the inside of the back plate, which is usually concealed by an attractive cover for the screw for aesthetic reasons. Be sure not to lose any internal components within the handle, for example the levers or plates on either side of the spindle. Ideally, keep these in the same order so that you can replace them in the event of a need.

Then, turn the handle to make it 90 degrees towards the window frame. Then, loosen the screw at the back of the handle that holds it to the internal spindle with a second screwdriver. Once the screw is free, you can take the handle off and take the broken spindle out. Replace it with a new spindle, ensuring that it’s the same length (you can find them online or at hardware stores). Screw it in place. Be careful not to overtighten as this could damage the handle or the window frame.

Ensure the new handle is installed after which you can close and test the handle. Hopefully, it will work smoothly and you’ll be able to open your window doctor near me once more.

Be sure to double-check that your uPVC window is shut properly while you’re working with the handle. If they don’t, you could experience damp and draughts in your home, as and also affecting your home’s energy efficiency. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure they close correctly.

Broken Spindle

It is often the case that the spindle within the handle is broken, not the handle itself. This is particularly common with upvc repair tilt-and-turn windows. These kinds of windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is connected to a centre rod that triggers a set of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism does not open when the handle has been turned, it is likely the spindle is broken. This could be a frustrating issue.

Fortunately, there are options to rectify this issue. A good locksmith can quickly and effectively fix the issue. A reputable locksmith will be able to disassemble the handle of the window by using a tool that removes the wheel part where the spindle is located. This can be done without causing any damage to the handle or causing other damage to the window frame.

Once the wheel has been removed, the technician can inspect the spindle and determine what has caused it to break. This involves breaking down the spindle into its constituent parts and meticulously noting their general condition as well as any particular areas of damage or excessive wear. This procedure is typically carried out by technicians in an environment that is clean.

Then, clean the damaged spindle. This will help get rid of any dirt or debris which could be hindering it from working normally. The spindle can be replaced or repaired. If it’s being replaced, the technician will need a dowel of a similar size to the original and drill mating holes in both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle is beyond repair, it may be necessary to replace it entirely. Home centers sell generic replacements but if the window design is unusual then you’ll require contacting an expert in woodworking or cabinet making who can make the exact piece. Once the new spindle is installed, it can be attached to the handle by lining up the screw holes on the handle with the frames existing screws. Once the handle is securely set, you are able to operate your uPVC windows.