How to Replace a UPVC Window Handle

If your upvc window handle is damaged, don’t be concerned. Replacing a upvc window handle is a fairly simple job and can be accomplished in a matter of a few steps.

No matter if you have an in-line or a cranked espagnolette window handle each one has a square spindle that protrudes out of the back plate. This spindle is then placed into the locking device.

Identify the lock type and handle

Over time windows’ handles or locks can become damaged and lose their function. The good thing is that this can often be remedied without replacing the entire window unit made of uPVC. One of the first things you need to do is determine the type of handle and lock you have, as this will determine what replacement parts you will need.

Identifying the kind of handle is done by looking at the base of the handle. A screw or pin will hold the handle to its base. If the screw is not present, this can be an indication that the handle has split off from its base. If the handle has been split in the middle and no longer grips onto the spindle, this can also mean that it needs replacing.

There are many uPVC handles that are available, but the Espag handle is the most popular. They are usually secured using two bolts, and come with a spindle that engages the lock mechanism inside the window frame. These handles are typically used on uPVC tilt and turn windows.

Cockspur handles are a different kind of uPVC handle. They’re similar to Espag handles, however they have lower projections from the frame. These handles are generally used on older uPVC windows.

Venetian window handles are a different alternative. They are similar to Espag handles, but have a flat bottom that allows them to be positioned flush with the frame. These handles are a good option for homeowners who are looking for an elegant handle that can blend in with their uPVC frames. These handles come in a variety of colors that can be matched to any design.

Measure the spindle

It is important to be aware of how the handle is fixed in place before ordering a replacement. This will tell you if it’s too tight or loose and if it’s able to fit inside the window frame. This can be done by identifying the handle’s type and measuring the spindle. The spindle is the metal shaft that connects the handle to the lock in the window frame. It’s available in various sizes with the current industry standard being 8mm. Older handles may have a cross-section of 9mm, so it’s crucial to take measurements of the old handle to make sure you get the proper size replacement.

There are a variety of window handles. The most popular are the inline Espagnolette handles and cockspur handles. These handles operate a locking system in the window. They use shootbolt rods that secure the window once it is closed. Depending on the type of handle, they are held in place by screws or pins.

You can find replacement upvc window handles online and in a lot of DIY stores. They are available in a variety of finishes and are suitable for new and replacement windows. For extra security they can be key-locking or non-locking fire-escape.

To remove the old handle simply open the window towards the door and then remove all the screws holding it in place. Be careful not to damage the screws and place them in a container for later use. Once the screws have been removed, carefully pull out the handle and measure from the base to the top of the spindle. This will provide you with the necessary information to purchase the right replacement. The spindle of the handle is the iron shaft that connects it to a lock gearbox in the window frame.

Remove the handle that was previously used

Changing a uPVC window handle is an easy task and usually will take less than five minutes with the proper tools. The first thing to do is determine the type and size of the handle or lock. This will allow you to determine the best replacement. After that, measuring the spindle will ensure that the new handle is a perfect fit. In the end, you’ll need remove the old handle and replace it with the new one.

Most uPVC handles have inline Espagnolette handles. These handles feature a central spindle which slots into the locking mechanism of the window. They are generally simple to remove, replace upvc window handle but you may require force if they are stuck. There are typically two screws that keep the handle in place which can be removed using the help of pliers or a screwdriver. Depending on the kind of handle you have, you may also need to remove any pins holding it in place.

After removing the screws you can remove the handle that was previously attached. The top of the base plate will be visible once the handle is in an open position, revealing two more screws that you can unscrew. If the sticker is still on, you will need to remove it.

It is now possible to screw into the new handle using the screws that came with the old handle. Align the screw holes on the window to the holes in the handle. After you’ve done this, replace the cap screws. Test the new handle. It’s simple to Replace upvc Window handle a uPVC handle, but you need to do it right.

Replace the handle with a new one.

If you’ve been able to successfully take the handle off the frame, now is the time to fit your new one. Begin by finding the screw covers and then lifting them out with your screwdriver. Once they are removed, put them in a secure place and proceed to the next step.

Then, put the new spindle in the handle by aligning it with the hole in the handle and screwing it in. Be sure to align the holes in the handle with holes in the window frame and use a screw that is identical to the one used before or it could cause the handle to not being secure.

The Espag handle made of uPVC is equipped with a spindle that is 7mm square which turns the lock mechanism that is mounted on the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, Replace Upvc Window Handle curving nose that locks onto the frame’s outer or cross member of the transom bar. They are typically found on older uPVC Windows.

It is essential to lock and unlock the window a few times after the handle has been put in place. If everything is in order then your new uPVC window handle should be secure and functioning smoothly. If you are experiencing any issues, these steps will help you identify the issue and fix it quickly. Bridgewater Glass can help you if you’re having problems with your uPVC handles or other glazed home improvements. Our glaziers are certified to repair or replace various window handles and frames, making us an excellent choice for your double-glazing needs.

Test the new handle

Over time, uPVC handles can become damaged and worn out. It can make them less secure and less effective which is why it’s important to replace them as soon as you can. It’s also an ideal idea to do this when you upgrade your windows, since changing your handle and lock will maintain the integrity of the windows you have just bought.

There are a variety of styles of uPVC window handles. Some are fixed to the frame with pins or screws, while others feature blades that slide into the lock mechanism. Each type has its own method of replacement, therefore it is important to know which type you have before working on it.

Espag window handles replacement handles are the most well-known kind, and are typically found on newer uPVC windows. The spindle extends from the handle to the lock gearbox and activates the locking mechanism when you open the window. They’re also simple to remove however, you must be careful not to harm the mechanism or the handle while taking them off.

Cockspur handles are another alternative for uPVC window handles. They’re held by a spur that hooks onto a wedge-shaped striker plate on the frame, and when you close or tilt the window, it activates the locking mechanism. This type of handle is more difficult to repair than other types however, it’s still an ideal choice for many homes.

Venetian handles are joined by two bolts, and they have a low projection on the frame. This differs from the Espag handle. They are ideal if you need an elegant flush handle that blends with your uPVC windows. They are ideal for commercial and residential properties.